Alright that's the answer I was looking for "easy" I have the shifter plate I kept from the other cab thank you!!

good day I need a little help please with a project I am thinking of taking on. what is the difference in height for the trans hump between 2wd and 4wd with and automatic ? are they the same height and the difference is in the bolt on plate for the transfer case shifter? I am looking at putting...

good day I am looking for 1 pair [left/right] lower xlt cab corners in the wide trim. driver quality ok as I need to match what I have just no dings/dents please. please send pics and price to ; [email protected]. must be willing to ship to Canada via usps mailthank you regards joe

check that the vent on top of the tank is not plugged

I have bought 4 steer boxes from redhead all worked well ,and now all my trucks steer just as good as any thing on the road today! They did the r&r that ford should have done 40 years ago!! you wont go wrong!

hella's all the way for me, I order the e-codes lights with 90-130 watt bosh bulbs and make my own relay harness. I do a lot of highway driving up here and they perform very well! I have tried that cool after market thing already ended up throwing them in the trash,ok if you don't go out of the...

Good day, this 76 custom "logger truck is getting real interesting! I got an Alberta in-transit permit for 3 days to drive this truck for service that I cant get in our little town and took this truck on an 80 km trip to "try her out" before the safety inspection on thurs. I got on the hyway and...

really? that's interesting! but the p.o. did say the company that owed that truck built 1 gooder out of 3 trucks and that's why I didn't know the "y" engine code. so it looks to me the "j" 460 engine code stayed fairly standard for 73/9 trucks? thank you for your help regards joe

good day the 4th letter on this trucks vin shows a [y] f25y is the 460 engine correct for this year? as I have no info prior the 78 in my manuals thanks

Hey guys I got those mounts off with out too much trouble, as there was no point in saving them any ways as they were completely done. This is what I did, I jacked up the cab to give a little room between the cab and the upper rubber, used a knife to cut the bushing out , cleaned out 35 years of...

Thanks guys yes I think a rebuild is in order as I will be keeping this one for my self. I am not sure but if I recall the c6 goes for about $1000 to build with a shift kit in this area. I guess I need to see the piggy bank later lol. And thanks to Adam for the correct frame mounts I can...

sorry mistype compression s/b 100 to 115 still good!

ya I didn't have time to play with this but good to know I will change them out 1 day. I am thinking this truck probably will be wrecked out any ways for the box [going on my s/c 4x4] I talked to the p.o. the other day and found out the engine was also re-built [bonus bonus bonus!!] I figured...

Well just an update I got my 76 f250 custom "logger box" truck ready to go for the inter-provincial safety and on the road for next week But the rad support and front inner fender area was rusted out badly so on the advice of my mechanic I decided to change them out. I had a 78/9 rad support...

Hi all, I am finally getting to my 79 f150 supercab 4x4 project. I got the box and front clip off, the cab will be next on the list. Upon talking to the prior owner he was saying the c6 was acting up not wanting to go into 3rd gear. My question is: are the 2 and 4wd c6 trans the same? Meaning...

tj one thing I always do on my trucks is to clean out and under coat the inside of the cab mount housing this is a bad area on these trucks that are always filled with mud/moisture. this =s rust in the floor also

Okay thanks I will pull that axle out any ways and have a better look. I like the 307 ratio for highway. It might work good with my reg cab with the 502/c6/gear venders overdrive. I am figuring from a 3.54 ratio now the engine is reving at 2100 rpm @ 60 mph in high gear and the over drive kicked...

oky doky I think any way I look at it there are going to be a bear! I will try my new 3/4" impact and try to break the bolts 1st and try jacking the cab up see if that works thanks again

Good day does any one know how common these axles are in the f250 line? This 77 parts truck I picked up last week has this axle [code 22/ 307 ratio] I know I have never seen one until now but it is a good highway ratio for lower rpms and speed. I don't know if there is any difference to a dana...

This is gotta be the best set I have seen so far - the price of course. If I was designing this set I would put a square chrome cover over the center of the pointers, the big plastic knobs on the "4 gauge" are just a little too much.

fellro,what is "your way" of doing this? I would like to save these if I could thanks

oky doky I guess cutting them off is the way to go. I was hopeing to get of easy but it is what it is. thanks guys.

Good day all, I am finally starting my build on the 79 f150 4x4 s/c and i need to completely remove and junk the body. [cab,box,front clip] I is there any easy way to remove the cab mounts? As I don't usually get into "rust buckets" I have never done this before. I need to replace the cab with...

good day thanks to all for your help I drilled out the tumbler on this switch [wow a job in its self!] and installed one from my 78/9s so now I have a switch. thanks again!

hi people I need a ignition switch/w keys from a 77. Any one have one they would part with? This logger box 76 custom cab may be swapped out with a 77 xlt in jade green [mint exept the dash pad is cracked] And it figures ford had to change the 76/77/78. They are all different! p.m. me please and...

thanks people I will try to get more pics but will have to put them into my gallery I also picked up a real nice 79 f150 s/c parts truck blue lariat interior [very good shape] 460 on propane [I jump on those right now/clean running, no wear] and I am going to look at a 77 f250 xlt today real...

Good day every one I finally got this truck home from Vancouver to fox creek [76 f250 custom] and wow what a find! I found receits in the glove box for close to $ 4500 in recent repairs to this truck! This is what was done about 6 months ago;new comp cam 268 lifters timing gear set...

oky doky thanks guys I will try that

good day people has any one ever compiled a list of the tooth count for the ring gears on ford 9" or dana 60/70 rear axels? I bought a f150 s/c parts truck last weekend ,the center carrier was swapped out and the door vin plate was missing so I really have no idea what ratio it is for sure. but...

Yes I thought it was a pretty good deal for $1000.00 [original price was $1400.00] and $850.00 to get it here to A.B. Then I will take my car trailer to Edmonton and pick it up there. Whether I keep it complete as is or use the box for my 4x4 I usually put a safety on them and drive for a...