Hi all, I am finally getting to my 79 f150 supercab 4x4 project. I got the box and front clip off, the cab will be next on the list. Upon talking to the prior owner he was saying the c6 was acting up not wanting to go into 3rd gear.
My question is: are the 2 and 4wd c6 trans the same? Meaning can I change the tail shaft out from a good 2wd trans with the 4wd trans tail shaft with the married np 205 transfer case? Or are there internals I need to watch for? [ rear output shaft, rear bolt pattern etc.]
Or will I need to rebuilt this one? I have about 3 good low milage 2wd trans sitting in my parts room and would like to use them if possible.
thanks for your help regards joe
My question is: are the 2 and 4wd c6 trans the same? Meaning can I change the tail shaft out from a good 2wd trans with the 4wd trans tail shaft with the married np 205 transfer case? Or are there internals I need to watch for? [ rear output shaft, rear bolt pattern etc.]
Or will I need to rebuilt this one? I have about 3 good low milage 2wd trans sitting in my parts room and would like to use them if possible.
thanks for your help regards joe