- 4
- 0
I just swapped my blown 302 in my 94 f150 with a 302 from a 87 crown Vic motor. Had to change out all of the pulleys and intake, oil pan and all of that good stuff. I had no idea these two blocks were so different. But now that it's all put together it won't start. It turns over but very slowly! The engine ran great before being installed in the truck so I don't think it's the engine. I had a little trouble getting the trans to bolt up but once it did it appears everything is lined up. Any ideas as to why it is turning over slowly? Any help would be appreciated!!