So this little piece needs to come off also???

I have the spindle off that is the end of the Axle shaft that is sticking out.

I am trying to put new ball joints in my 3/4 truck and cannot get the damn things out!!!! The old ball joints will not come out tried everything that I can think of here is a pic.And also I figured while I have it tore down so far I would put new u-joints in it and cant get them apart...

Forgot to mention already spent the money on the new ball joints. Most likely will bet the rotars turned while I have them apart, and maybe replace the u-joints in the front axle.

I have 3 ton jack stands that work very well plus I leave the jacl under as well. Here is a pic of the front end with the tire off. I think I have the ball joint figured out. , just need to figure out the front brake calipers. How do they come off.Thanks Joe

So if I pop the tie rod end off Ill be good to go?

Do you have to take the brakes off and the rotor to do the ball joints? If so how do you get the brakes off????Thanks Joe

Just got the the new ends from another parts store and everything measured up the same. Still having the same problem. Ill just run them down tight and see how they look. The left side looks fine but the right side on the other hand got tight and went to tighten it a little bit more and the...

I am replacing the inner and outer tie rod ends. My truck is a ford 3/4 ton 4x4. I replaced the inners with no problems. Onto the outers. Get them put on and am tightning the nut down on the end of the tie rod that goes to the frame. The nut goes way down onto the threads and is down far...

After reading some other posts in here and trying the little test of pushing pullin on the sides and top and bottom I caome to the following. Ball Joints seem good, Tie rods must be bad. They really move left to right not top to bottom. :headbang: So time to order some different parts.

Cool will have to give it a try.Thanks Joe

My next days off I am goin to replace upper and lower ball joints on my F350. I did a search on it in here and am wondering if I need to rent me a ball joint press for this year of truck. All the search threads I have read are on new trucks. It is 4wd. I do have a ford wrench (BFH):o...

My front tires are like this when parked / \. Its my soon to be next project to get fixed after new plugs and wires. What would the problem be? Just got some new tires and the ones that where on there wore really bad to one side and I dont want to mess up the new shoes.Thanks Joe90 3/4 4x4

I need a bumper and am thinking about building one. Anyone have any pictures of theres so I can get some Ideas.Thanks Joe

TY so much. :bow:

They truck is a 90 3/4 4x4 V8 big block from what it looks to me. For mtflatThere are 8 bolts on the valve cover 19 i think on the oil pan timing cover not sure if you meant the one the hold other things to it also.Here are some picsThanks Joe

Hello there and welcome its a nice place in here.

I bought my truck this last winter, and I am trying to figure out what motor is in it. Friend of mine says its not the orginal motor and the one that is in it is out of a car, because it has 2 dipstick tubes one on each side. Thanks in advance

welcome to FTF:)

oh yea its a 90 3/4 ton 4x4:hammer:

I want to make this the go anywhere wood haulin snow pushin truck is this a need to be fixed thing or take it off and pitch it.Thanks smokey

I noticed the other day something hanging down around the rear end. See picsand am wondering what it is.Thanks in advanced 3/4 Ton Joe

Hello E1 glad to find this place. First time ford owner, and am wanting to fixer up a bit. So Ill be asking alot of questions and trying to give my $.02's when I can.3/4 Ton Joe