Window handle

[73F100Shortbed]

Thanks for posting that info Bill.

 

[LEB Ben]

Does anybody know of a place that repops the little plastic washer that protects the door panel?I found one in the junkyard,but have yet to find another.I need one to keep my window crank from rubbing on the woodgrain trim.Even though I have an 80,I don't think there's much of a difference.

I remember I got some from LMC the first couple of times I ordered handles from them. I can't remember if DC sent them along or not though. I dunno if you can just individually buy the washers from them though. But I'd imagine a trip to the hardware store could probably yield a suitable substitute.

Thanks for posting that info Bill.

X2...I wouldn't mind picking up some extras.

 

[m78]

There's 2 different window crank handles, one for the XLT and Lariat door panels that are thicker. The handle stem is longer.
And a shorter stemmed handle for the standard door panel.

 

[Fordzilla80]

I remember I got some from LMC the first couple of times I ordered handles from them. I can't remember if DC sent them along or not though. I dunno if you can just individually buy the washers from them though. But I'd imagine a trip to the hardware store could probably yield a suitable substitute.

I'm too lazy to look at my catalogs,and spoke before I checked the website.LMC lists them,as well as the spring,for 1.95 each.I looked up the Dentsides,and they have the springs and plastic spacers(listed as Escutcheons), for the same price.For 1.95,i'll look towards DC or make my own springs.That price is a bit low for me to trust the quality.Who wants to be the guinea pig?

 

[LEB Paul]

1.95 for a plastic washer? I think it'll be fine..

 

[Fordzilla80]

Well,on the trucks with Woodgrain Inserts,it's kinda important because without it the handle will tear the heck out of the inserts.It did to mine.But with the washer,it keeps the handle from touching the panel.

 

[BKW]

I'm too lazy to look at my catalogs,and spoke before I checked the website. LMC lists them, as well as the spring, for 1.95 each. I looked up the Dentsides, and they have the springs and plastic spacers (listed as Escutcheons), for the same price.

For 1.95, I'll look towards DC or make my own springs. That price is a bit low for me to trust the quality.

Post #20: I listed 179 genuine Ford springs, and I coulda listed 100 more, either from dealers or obsolete parts vendors. The last MSRP was $1.84.

C8AZ6223370A .. Nylon Window Regulator Handle Plate (escutcheon) also fits 1968/72 F100/750, 1968/77 Bronco, 1968/70 LTD/Galaxie/Thunderbird, 1968/72 Mustang/Cougar, 1969/74 Econoline.

I cannot list the original MSRP and dealer net cost prices for only one, because these came in a package...of how many I dunno.

The package MSRP was $21.97, dealer net cost was $13.18.

KINSEL L/M in Beaumont TX has 8 = 800-816-2894.

GREEN SALES CO. in Cincinnati OH has 11 = 800-543-4959

PARTS INTERNATIONAL in Farmers Branch TX has 15 = 888-727-0418.

MSRP - FoMoCo Dealers -Obsolete Parts. Since the parts are obsolete, the dealers can no longer return them for credit...so are STUCK with them.

Usually the parts can be bought below MSRP, sometimes below dealer net cost.

 

[Fordzilla80]

I skimmed your post quickly and completely missed that.

Do you know if the springs are the same Between the 73-79's and the 80-86's?

 

[BKW]

DOAZ6322624A .. Window Crank Handle Spring / Obsolete

Fits: 1970/79 Passenger Cars, 1973/80 F100/350 / 1978/80 Bronco.

E1TZ1022624A .. Window Crank Handle Spring / Obsolete

Fits: 1981/91 F100/350, F(Super Duty) & Bronco.

There are 93 of these still available from dealers/obsolete parts vendors. I'll list the sources if interested.

No source in FL has either one, there are some of both in GA.

 

[LEB Ben]

I'm too lazy to look at my catalogs,and spoke before I checked the website.LMC lists them,as well as the spring,for 1.95 each.I looked up the Dentsides,and they have the springs and plastic spacers(listed as Escutcheons), for the same price.For 1.95,i'll look towards DC or make my own springs.That price is a bit low for me to trust the quality.Who wants to be the guinea pig?

For some reason, I'm just finding out about a place called Obsolete Ford Truck Parts aka Classic Auto parts (they cater to more than just Fords) in Oklahoma. Anyway, just got their catalog in the mail yesterday, and as fate would have it, they had the washer and spring in there as well...I thin under $3 you could have the washer and spring. Ironically, as fate would have it, when I flopped open the pages, it opened up to door parts, low and behold, these were on the page.

 

[Mil1ion]

I probably have an OEM replacement of every part you need

I have cranks,washers and springs

 

[Fordzilla80]

E1TZ1022624A .. Window Crank Handle Spring / Obsolete

Fits: 1981/91 F100/350, F(Super Duty) & Bronco.

There are 93 of these still available from dealers/obsolete parts vendors. I'll list the sources if interested.

No source in FL has either one, there are some of both in GA.

Would you mind posting the ones in the Southeast if any?I'd greatly appreciate it.

 

[BKW]

^ ^ Dennis, Loonie Land is a loooong way from Florida. ^ ^

Would you mind posting the ones in the Southeast if any?

E1TZ1022624A =

BILLY CAIN FORD L/M in Commerce GA has 1 = 706-335-3105.

TRI COUNTY MOTOR CO. in Mckenzie TN has 2 = 731-352-7925.

GREEN SALES CO. in Cincinnati OH has 65 = 800-543-4959.
---------------------------------------------------------
DOAZ6322624A =

CAIN FORD L/M in Cornelia GA has 3 = 706-778-2121.

SAPP FORD in Baxley GA has 4 = 912-367-2466.

KEN COX FORD in Troy AL has 4 = 877-269-3673.

JST AUTOMOTIVE in Lebanon TN has 8 = 615-443-3086.

 

[Fordzilla80]

Thanks for posting the numbers Bill,i'll look into them here shortly.

 

[Fordzilla80]

Hey Bill,do your books cover the rest of the interior pieces as well for the 1980-1986 trucks?

 

[73F100Shortbed]

For some reason, I'm just finding out about a place called Obsolete Ford Truck Parts aka Classic Auto parts (they cater to more than just Fords) in Oklahoma. Anyway, just got their catalog in the mail yesterday, and as fate would have it, they had the washer and spring in there as well...I thin under $3 you could have the washer and spring. Ironically, as fate would have it, when I flopped open the pages, it opened up to door parts, low and behold, these were on the page.

I've been to the actual store. Cool place to walk around in. When I was there it seemed a bit expensive. But I haven't bothered going there in a few years.

 

[Mil1ion]

^ ^ Dennis, Loonie Land is a loooong way from Florida. ^ ^

Yes, but the mail system takes care of the distance

 

[BKW]

Hey Bill,do your books cover the rest of the interior pieces as well for the 1980-1986 trucks?

My books cover everything from 1928 thru 2001.

 

[Fordzilla80]

Alright,I need to find some info on an interior panel that I think was a one-year wonder kind of thing.I still need to get the number,but when I do i'll post a thread in the 7th gen section about it.Thanks man!

 

[Mil1ion]

my cdroms cover
48-2002 trucks
60-79 cars

my books cover an assortment of cars and trucks