***Wanted/Selling dent/bump parts***

[73F100Shortbed]

Sorry "Shortbed" I bought the sucker for the grill shell. :/

Alvin in AZ

Just my luck! LOL

 

[bucks77ford]

Anyone have a nice center steering wheel pad without cruise control? I'm keeping my stock steering wheel and don't need one with cruise. Either just black or with woodgrain doesn't matter. Thanks.

 

[Mil1ion]

I think I have a really good black one.

 

[Alvin in AZ]

Just my luck! LOL

Heck, you're in New Jersey, they are more plentiful back there than here.
Here they are still being used, see? More miles, more owners, more dents.
Hmmm... does the salt eat the aluminum stuff up too?

Alvin in AZ

 

[73F100Shortbed]

Mine has a dent in it. I don't think the salt eats it really, but I wash my truck even in the cold weather to try and keep the salt to a minimum. I have not found any dentsides in the junkyards here. There might be a few in southern Jersey but haven't travelled down there to see.

 

[1985 Ford F-150]

No aluminum dont rust it just get dull in the finish.

 

[Jolly Green]

Aluminum doesn't rust, but it does corrode. The aluminum wheels on my 2003 Ranger look like crap after just a few winters. And I keep the truck clean!

I'll never run aluminum rims on anything again--as long as they're still putting salt on the roads.

 

[Alvin in AZ]

There might be a few in southern Jersey but haven't travelled down there to see.

Call first?

I got my grill shell off Craig's List and it came with a whole truck attached to
it minus the 360FE, radiator and the passenger side engine perch. It came
with a pair for a dumb-ol' 460 tho.

$500

I really like the kid (whore-hey) I got it from, he even delivered it on a dolly.

Mine has a dent in it.

So does my "new" one, but at least it ain't got a low yield point like my after
market one does. (bend it just a little bit and it stays where you let go)

Alvin the stupid ugly Gringo in AZ likes Messcans

 

[1973 F-100 4x4]

Mine has a dent in it. I don't think the salt eats it really, but I wash my truck even in the cold weather to try and keep the salt to a minimum. I have not found any dentsides in the junkyards here. There might be a few in southern Jersey but haven't travelled down there to see.

I know for a fact that there are quite a few dentsides in the salvage yards in upstate New York.
If you get a chance to go there, you might want to check out a place I use to frequent on a regular basis.
It's in Auburn, NY and it's called Auburn Pick 'n' Pull.
More often than not, they'll have what you need.
It's been 8 years since I've lived there though, so I'm not sure what they've got there now.
Still, it would be worth checking out though.

 

[BKW]

Anyone have a nice center steering wheel pad without cruise control? I'm keeping my stock steering wheel and don't need one with cruise. Either just black or with woodgrain doesn't matter. Thanks.

D3TZ13A805A .. Horn Pad & Switch Assy-Black Camera Case Finish / Obsolete

Fits: 1971/77 F100/350 / 1974/77 Bronco / 1975/77 Econoline / All w/o Cruise Control.

GREEN SALES CO. in Cincinnati OH has TWO = 800-543-4959

I believe Dennis Carpenter has reproduced this: 704-786-8139.
-------------------------------------------------------------
D3TZ13A805B .. Same as above, but Walnut Grain Finish / Obsolete

GREEN SALES has FOUR.

 

[BKW]

1976/79 F100/350 / 1978/79 Bronco Wiper Knob

Anyone have the windshield wiper knob seems i cant find the correct one
??
i got one off of a chebby dont like it in my truck though it jinxes it.

D3OZ17513B .. Wiper Knob / STILL available from Ford.

(D3OZ17513B replaced D3OZ17513A due to a package quantity change)

MSRP: $30.98 // FTFpartsguy.com price: $22.31.

Fits: 1976/79 F100/350 / 1978/79 Bronco

Fits: 1973/76 Torino/Montego / 1974/80 Pinto/Bobcat / 1974/76 T-Bird.

 

[BKW]

1975/79 F100/350 & 1978/79 Bronco Headlamp Switch Knob & Shaft

Does anybody have a headlight knob and shaft for a 1978 truck? I"m looking for a really nice one for my restoration. IM me here if you have one to get rid of.

D4FZ11661A .. Headlamp Switch Knob & Shaft Assy / Obsolete

Fits: 1975 F100/350 (after serial # T80,001) 1976/79 F100/350 / 1978/79 Bronco.

Fits: 1974/80 Pinto/Bobcat.

KLIMESH MOTOR SALES (ex-Ford Dealer) in Calmar IA has ONE = 563-562-3241

MATLOCK FORD in Franklin IN has ONE.

COLE MOTOR SALES in Ada OH has ONE.

TED GREEN FORD in Stockbridge VT has ONE.

 

[BKW]

Need a set of radio knobs for a stock AM/FM radio if anyone has a set laying around.

Parts catalog sez the same knobs are used with all radios.

2) D4FZ18817A .. Outer Radio Knob / Obsolete

Fits: 1975 F100/350 (after serial # T80,001) / 1976/79 F100/350 / 1978/79 Bronco.

Fits: 1974/80 Pinto/Bobcat

GREEN SALES has 20.

KLIMESH MOTOR SALES has 7.
----------------------------
2) D1AZ18830A .. Inner Radio Knob / Obsolete

Fits: 1973/79 F100/350 / 1978/79 Bronco

Fits: 1971/80 Pinto/Bobcat / 1971/72 LTD

GREEN SALES CO in Cincinnati OH has 33 = 800-543-4959.

KLIMESH MOTOR SALES (ex-Ford Dealer) in Calmar IA has 22 = 563-562-3241.

PARTS INTERNATIONAL in Farmers Branch TX has 9 = 888-727-0418.
-------------------------------------------------------------------------
Looking for radios? Ford dealers send radios out to a local auto radio shop be repaired under warranty. Go to your local dealer, find out where they send the radios.

Then go there...many radio shops have all sorts of radios in their back rooms.

Dealers use "floater" radios...what the he!! is a floater radio?

Dealers take new radios out of the box, install them in customers vehicles so they don't have to wait for their radio to come back from repair.

I wouldn't be a bit surprised if 1000's of these floater radios were stashed in dealers back rooms and attics this very day.

It doesn't cost a cent to ask. And most all of the floaters were repaired at some point, so it's plug and play.

 

[73F100Shortbed]

I know for a fact that there are quite a few dentsides in the salvage yards in upstate New York.
If you get a chance to go there, you might want to check out a place I use to frequent on a regular basis.
It's in Auburn, NY and it's called Auburn Pick 'n' Pull.
More often than not, they'll have what you need.
It's been 8 years since I've lived there though, so I'm not sure what they've got there now.
Still, it would be worth checking out though.

Thanks for the info!

 

[LEB Ben]

Anyone have any lower race track trim for a Bronco?

 

[73F100Shortbed]

Anyone have west coast jr. mirrors for a 73-79?

 

[Mil1ion]

Selling

seat cover

1975 460 Fan shroud

78/79 Tilt columns

and much much more

 

[LEB Ben]

Dennis...forgive my ignorance, but you specified that fan shroud for a 460, so it won't work for my Bronco (351M) with an extra cooling radiator? If it will lemme know how much and you can add that to my list.

 

[1985 Ford F-150]

It might I put a 460 shroud on my 390 when I put the super cooler in there. I had to put a shorter spacer for the fan that goes i n between the puley and fan, I also went and put a fan clutch on and the fan.

 

[LEB Ben]

It might I put a 460 shroud on my 390 when I put the super cooler in there.

Yeah...I didn't really think it would be too much of a difference, I just didn't know if a 460 fan had different dimensions than a 351M...or if the shroud came of a super cooler and the mounting holes were in different locations.