The Dentsdes we find for sale - post them here

[LEB Ben]

okay ...I won't tell you, but I can and will say this..I am willing to bet that you have more money in your pocket being in college than I do having a wife/kids and a mortgage.
when I search my user cp and don't see other posts I guess I never posted my other toys??

Dammit...I knew it, some guys find all the deals. So what are the plans for this one?



As for your other toys...I don't think I've ever seen a full display...so post up.

Same here Ben, same here..

No kidding...it's rough seeing all these guys and their toys...most kids go into debt right out of college for wanting to live the good life...I'll go broke from buying up all the dents I can find.

 

[lostinfords]

I feel your pain...being that I am buying the toys and surviving

here are some pics
this 77 f250 4wd crew, stick, disc brake, div. transfer case, frt lpd60, reard60, 351m or a 400?, a/c longbed, was a duallie, switched it back to single rear wheel, now in process of frame off resto and swapping cabs, upgrading to 55 gals stainless aft fuel tank, possible midship tank, custom bed w/ tool boxes on p/s and d/s and probably things I am forgetting

installing this bed on it

my 79 super cab 400, manual, a/c, tilt, 4" lift for rear bench seat, d60 rear and planned upgrade for hpd60 frt and d70 rear and a second resto, did it 12 yrs ago now the drip rails are going and the bed went ..1st pic was yrs ago ..2nd pic is present, just waitng to find decent cab to swap

My 79 f150 body is gone but I have a 2wd for a bed/cab swap, the 4wd runs great w/ 9" locker and 4" lift w/ 35's

my 78 bronco, just an original cruiser,400,auto,a/c

the parts stable 78 f350 2wd crew cab, d70 donor...78 f250 crew cab 4wd, parts donor, parted out and kept 'goodies' from a 74 crew cab 4wd,..78 f250 utility body, 400,auto 4wd w/ frt and back d60's...donor?? and a 78 f150 2wd donor to a 4wd chassis

check out the skid plate and center link protector for the d60

not atually a dent, but it oversees the dents and picks them up, not too mention makes the spending $$ to get more ..88 f350 4wd mason dump, 460 efi, 5spd, a/c

 

[LEB Ben]

Damn...I had no clue you had all those...I knew about the 78 Bronco and 79 SC...but didn't know you hoarded such an extensive stable. Very nice. Guess I know who I need to call if I need parts too...hahaha.

 

[lostinfords]

ain't a dent, but it sure passed a few ...also have a daily driver 69 GTO convertible, 400 bored .030, 4spd

seem to have that reputation up here, they all, the dents that are sitting idle, seem to gravitate to me and others, the other local dent owners...but that is expanding to other states.. come for the parts

 

[1979Camperspecial]

my 79 super cab 400, manual, a/c, tilt, 4" lift for rear bench seat, d60 rear and planned upgrade for hpd60 frt and d70 rear and a second resto, did it 12 yrs ago now the drip rails are going and the bed went ..1st pic was yrs ago ..2nd pic is present, just waitng to find decent cab to swap

gonna need pictures of that four inch lifted rear seat if you can.....please....

 

[m78]

[QUOTEinstalling this bed on it][/QUOTE]
Some one put your tool box on the wrong side

 

[LEB Ben]

gonna need pictures of that four inch lifted rear seat if you can.....please....

Post #4:

http://www.fordtruckfanatics.com/forum/showthread.php?p=189794#post189794

Some one put your tool box on the wrong side

Damn...good catch, what's the deal with that anyway? Get a bed with no toolbox, and you put one in?

 

[UNRULEE]

Might be too pricey, and the engine is questionable.

http://www.bismanonline.com/getListing.php?tcat=2&cat=11&p=5&a=482270

 

[Alvin in AZ]

Some one put your tool box on the wrong side

I disagree with your use of the "W" word there.
It'd be handier on the driver's side wouldn't it?

Anyway, a guy posted pictures (FTE?) where he'd added another on the
driver's side and ever'body thought it was pretty cool. Don't you too?

I mean... now that you see it that way?

Alvin in AZ
ps- There are lots of them for sale in Phoenix and Tucson here was a quick
look just today to go with this post as an afterthought...
http://tucson.craigslist.org/cto/1464300936.html
another...
http://tucson.craigslist.org/cto/1462658872.html
I personally don't like cars (ick), YMMV...
http://tucson.craigslist.org/cto/1458080229.html
If that's an "Arizona car" it prob'ly has less rust on it than a "garaged Michigan car". LOL
As an example check out the rust on my "Arizona truck"...
http://www.panix.com/~alvinj/file12/rideheight.jpg

 

[lostinfords]

Ben...that was not find a bed and put one in..it was put two in, always wanted one on the drivers side also, not really that practical for curbside access, but, heck, the truck is not always parked at a curb and besides I did not do it for practicality I did it because I like it

Alvin..that was my post on FTE I do believe ..caused quite a stir up over there, they all said it could'nt be done, well you see it in, just needs the fine tuning now...good choice in liking it too

Camperspecial... I have some additional pics..probably too may to post one one item as een from different views, it actaully worked quite well w/ the kids, their knees weren't in their chest when they sat in back, pm me w/ an email address and I can fwd them to you if you'd like

 

[LEB Ben]

Ahh yes...I remember that write up now...forgot it was you. Now things are making sense.

 

[Alvin in AZ]

Alvin..that was my post on FTE I do believe ..caused quite a stir
up over there, they all said it could'nt be done, well you see it in,
just needs the fine tuning now...good choice in liking it too

Cool, yeah "lostinfords" rings a bell now that you mention it.
My '75 F100 SuperCab parts truck doesn't have the tool box. :/
Your FTE post came to mind as I was looking to buy it. LOL

Alvin in AZ
ps- To be legit with the thread's title...
http://tucson.craigslist.org/cto/1459611130.html
http://tucson.craigslist.org/cto/1456274836.html
http://tucson.craigslist.org/cto/1456249009.html
http://tucson.craigslist.org/cto/1455832950.html Bump
http://tucson.craigslist.org/cto/1455706560.html
pps-
Seems to me if you were to watch the southwest desert area's
Craig's Lists you could get someone close to go look at it and
maybe arrange for you to buy it. I know I'm game for that.
You'd have an "agent" looking out for your interests and take
pictures and write descriptions that you could trust?

 

[LEB Ben]

Damn Alvin...the SW sure does have some clean trucks...even better than the SE IMO.

 

[LEB Ben]

HEY SCOTT...I think I may have found you a sport steering wheel pretty cheap ($140). I'm sorry, I dunno how to tell if it is actually a real sport steering wheel...but if it is, I'm passing it along:

http://www.nc4x4.com/forums/showthread.php?t=74348

Scott...did anything end up coming from this? I noticed it was still for sale when I checked his ad. Since I don't know the differences, did it check out as an original?

 

[Ranger429]

It's an original but I think it is overpriced. The rust on the metal could be fixed by repainting it. I'm passing on it.

 

[LEB Ben]

It's an original but I think it is overpriced. The rust on the metal could be fixed by repainting it. I'm passing on it.

Alright...was just wondering if you were gonna give it a go...since you're not, I think I'll throw him an offer.

 

[LEB Paul]

... I'll trade you my sport wheel for your non sport wheel and 100 bucks

 

[LEB Ben]

... I'll trade you my sport wheel for your non sport wheel and 100 bucks

Throw in your 350 brake stuff and you got a deal...haha. Didn't know you had a sport wheel though. But I figure I'll throw $70ish at that guy and see if he'll take it.

 

[LEB Paul]

Yeah, it's a little rusty though. My buddy has one too, I didn't know they were worth so much - I might have to borrow his in the middle of the night and sell it on ebay.

 

[lostinfords]

Ben...it is a good thing that you live far away...I feel that you would be like that stray dog begging for a bone....AND.. f350 brake stuff, sport steering wheels, tilt columns, d60's and what not...