Hello........ anyone home???????

[dustybumpers]

Wow sparky They hook ya up!!!!

I have a guy up here sells me my stuff
But I have to buy in bulk
I buy a LOT of wrecked stuff too.......


stop measuring with coins, set your parts on a measuring tape.
I have a bunch of servos from the cars might help.

They are right about controllers.
Thread is turning out to be good....

 

[cbaker65]

most the servos for the wheels ive seen on other planes connected directly to them on the top of the shafts or on top of the wheels looked just like the servos with the micro teeth all around them for a regular servo horn to snap on to... this one doesnt work like that annoyingly..

Naw ,that is not what I'm talking about ,I am talking about the wire that connects into the receiver ,if the wire just plugs into the receiver ,then you
can simply unplug it an do away with that servo an buy a new one in which
most servo;s come with a variety of extra horns with the purchase of a
new servo!....LOL

For example ,I'm watching these micro servo's to install in my airplane!

http://www.ebay.com/itm/5pcs-Micro-...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

Really ,I am watching these for the plane I showed in the pics along with this trans. & Rec....

http://www.ebay.com/itm/HOT-FS-T4B-...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

This one here shows the horns that comes with it!

http://www.ebay.com/itm/9G-SG90-Mic...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

 

[dustybumpers]

I have a whole shed full of controllers
Let me know what you need, and show me a price, I'll beat it If I have that controller

 

[Sparky83]

i dont think think yall are getting it.. they way yall are talking is it sounds like you think its the one directly connected onto the servo.. but its not.. the servo horn on the servo itself is fine.. theres a link between that servo horn and the steer wheel that connects to another horn on the steer wheel.. like center link between 2 tie rods on a truck.. its the stupid collar itself thats broke that holds the arm to the wheel shaft..

but guess i cant explain it well enough so the plane wont ever get fixed.. even the guys at the store look at me like im stupid when i explain where it goes..

 

[dustybumpers]

Pic of the collar where it is supposed to be would help, Like I say, I have carcusses

 

[Sparky83]

next time im down at the other house. where i left the plane because thats where i intended to fly it since there was more room.. was better at crashing than flying it...

 

[dustybumpers]

LOL
Yeah, takes a lot of room to break them.........

 

[Sparky83]

 

[Sparky83]

Are these detailed measurements enough???

 

[cbaker65]

Nice pics ,but I don't need detail pics ,I know what those parts are!
I lived& breathed it for 25 years ,that is not one of a kind!....

 

[cbaker65]

https://youtu.be/VFb_cWHhWCc


That's fine if you want to spend time taxing down a run way ,but most people with a small foamy just hand launch them!...


https://youtu.be/WprgLs0bltI

 

[dustybumpers]

I hand launch my planes.
Landing them sometimes can be tricky. Plan ahead......

 

[cbaker65]

I hand launch my planes.
Landing them sometimes can be tricky. Plan ahead......

Lol...yup!....

 

[cbaker65]

Heres me test running one of my planes!

https://youtu.be/bdZRkUGCVq8

An goofin off with the monster tuck!.

https://youtu.be/yXKm8_iyWj4

 

[cbaker65]

my mgt.
an messin with my gas baja..

https://youtu.be/6zQN3oizK_c

An my B-block Ld3 street ride!..

https://youtu.be/FJzKebl8TUY


An me wrenchin on a RC!!!

https://youtu.be/d4Jyoq_mYZQ

Tuning the Mgt....

https://youtu.be/lRfQM005xuU

 

[dustybumpers]

LOL @ burnning the rubber off the tires!

I have piles of useless tires here!
I'm getting ready to cut loose some of my big gas cars. Since the cancer, I have lost a lot of interest.
Maybe I'll post some pictures, get Sparky hooked on a 100 mph 1/6 gasser........

 

[cbaker65]

LOL @ burnning the rubber off the tires!

I have piles of useless tires here!
I'm getting ready to cut loose some of my big gas cars. Since the cancer, I have lost a lot of interest.
Maybe I'll post some pictures, get Sparky hooked on a 100 mph 1/6 gasser........

Lol....I'm about fizzled out myself!

Very burned out an don't even want to see another wrench!...

 

[Sparky83]

Pic of the collar where it is supposed to be would help, Like I say, I have carcusses

Just remembered i had this pic from the last crash.







In the one pic of the busted nose if you zoom in you can see where the piece is mounted ntm the bigger screw i got to fit the larger hole i made to hold it in place.

 

[cbaker65]

Just remembered i had this pic from the last crash.

View attachment 4503

View attachment 4504



In the one pic of the busted nose if you zoom in you can see where the piece is mounted ntm the bigger screw i got to fit the larger hole i made to hold it in place.

5 minute apoxy & clear packing tape is your friend when it comes to foamy's!

A friend of mine use to fly the Cox Ez Bee 049 foamy's an he wrapped
his entire plane in clear packing tape which helps make the foam very
strong an can withstand impacts.

Ive wrapped my foamy's when I had them!...

 

[Sparky83]

i rubber cemented the fuselage back together... they included a large tube of it.. guessing they knew itd come in handy??