Grabit screw extractor

[wareagle]

Has anyone used this on their mustang? I am trying to removed the stripped roofside weatherstrip screw near the door hinge and tried this one and am not having good luck...

http://www.google.com/products/cata...a=X&ei=l0IGT9rSA4ju0gGX-_21Ag&ved=0CEsQ8wIwAw

 

[smokey]

Those have a 50/50 chance of working. I have a set of them. I have better luck with left handed drill bits.
Some times I cut a slot with a dremel and get them out. other times I just grind the head off with the dremel or die grinder.

 

[wareagle]

Yeah, didn't have any luck at all with this set. Will try to take them back to Lowes tomorrow and see if they have some left-handed drill bits.

Thanks Randy.

 

[m78]

I usually cut a slot for a standard screw driver, or impact screw driver.
If that fails your halfway to cutting the head of.
I've also ground the head off, then cut a slot and screwed it on in to have it fall out the other side.