Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

94 F250 both fuel pumps won't turn on

1
0
My buddy has a 94 F250 RWD 5.0. He can't get it started. it seems to be getting spark, but no gas. He said he replaced the filter and something by the fuel rail. I listened for the pumps to turn on in the back and neither of them did. He said there was a reset switch on the passenger side for the fuel system. That did not work. Suggestions please and thanks.
Bill B.
 

blacksnapon

Moderator
Staff member
9,461
301
waynesville,mo.
My buddy has a 94 F250 RWD 5.0. He can't get it started. it seems to be getting spark, but no gas. He said he replaced the filter and something by the fuel rail. I listened for the pumps to turn on in the back and neither of them did. He said there was a reset switch on the passenger side for the fuel system. That did not work. Suggestions please and thanks.
Bill B.
Look and see if theres power to the wire going to the inertia switch. When the switch is ok there should be power at both wires.
 

flareside_thunder

Florida Chapter member
7,812
246
Yup, the inertia switch is what your buddy found under the passenger side kickpanel. At this point I'd be looking at a bad fuel relay. Also, make sure you have power to the tank selector switch.
 

Ford Truck Articles

Recent Forum Posts

Top