2006 f350 6.0 crank, no start

[awigley]

I have an 06 f350 with the 6.0 with about 360k miles. It died on me going down the road. I had to have it towed back home. I replaced the fuel filters when I got it home. This didnt help. I then replaced the STC fittings on the hpop and the ipr valve. This still didn't help either. About 10k miles ago I replaced the circuit board on the ficm. It has fresh oil in it. But it still doesnt start. It will not start with ether either. I dont have a code reader to pull the codes so I dont know if there are any. I am a good distance from any repair shops and it would be very costly to have it towed to the nearest one. If anyone has any ideas they would be greatly appreciated.

 

[blacksnapon]

I have an 06 f350 with the 6.0 with about 360k miles. It died on me going down the road. I had to have it towed back home. I replaced the fuel filters when I got it home. This didnt help. I then replaced the STC fittings on the hpop and the ipr valve. This still didn't help either. About 10k miles ago I replaced the circuit board on the ficm. It has fresh oil in it. But it still doesnt start. It will not start with ether either. I dont have a code reader to pull the codes so I dont know if there are any. I am a good distance from any repair shops and it would be very costly to have it towed to the nearest one. If anyone has any ideas they would be greatly appreciated.

Without knowing codes or looking at data, It'd be a guess from here. Sounds like a high pressure oil leak though. An air test would be necessary to pinpoint it.