Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

1999 ranger no start no fuel no spark

F 150Cobra

"Wild HoRsE" Got Torque?
3,642
104
Aruba
2.5 ranger no spark no fuel

ecm relay tested
crank sensor tested
full ecm tested

its got no spark and no activities at the injectors...
and no codes!!!

we tried everything!!

what else could it be???
 

F 150Cobra

"Wild HoRsE" Got Torque?
3,642
104
Aruba
it does crank but no spark or fuel
 

blacksnapon

Moderator
Staff member
9,461
301
waynesville,mo.
Believe it or not, check your fuses under the hood.
 

F 150Cobra

"Wild HoRsE" Got Torque?
3,642
104
Aruba
Believe it or not, check your fuses under the hood.

cheked everyone passed even cheked the ones in the dash
swapped every relay also!

we even lift the fuse box to see for broken wires and corroded wires
 

F 150Cobra

"Wild HoRsE" Got Torque?
3,642
104
Aruba
Use your IDS and check your network test. Bet you the pcm isnt communicating.

thats the strange part.. the ids works fine with it

even did a KOEO test only code i got was for TPS out of range and i dont think that will cause a no spark or no injector condition

the fuel pump turns on and everything just no spark and no activities at the injectors
 

F 150Cobra

"Wild HoRsE" Got Torque?
3,642
104
Aruba
the owners messed with the crank sensor and messed it up it was too close and didnt get good reading.. we had to shim it about 2 hours of shimming out and in to test it when it will work. that was the prob the truck runs good now
 
Last edited:

blacksnapon

Moderator
Staff member
9,461
301
waynesville,mo.
Are you sure you're using your IDS? The datalogger function would allow you to see cranking rpms or any out of spec readings.
 

F 150Cobra

"Wild HoRsE" Got Torque?
3,642
104
Aruba
Are you sure you're using your IDS? The datalogger function would allow you to see cranking rpms or any out of spec readings.

yes i was thats why i didnt get any rpm reading when cranking??

i saw that when cranking we didnt get any rpm reading in the datalogger but we didnt know what it was.. we wasnt sure thats why we cheked the crank sensor.
 

Ford Truck Articles

Recent Forum Posts

Top