Just turned 200,000 on the Truck and still love it.smilieFordlogo

Ok Tks I'll give it a try.

First the truck is running just fine.The other day while I was driving to work my low fuel light and bell came on and fuel gauge was on the low stop ( below empty). The tank was full, just fill it. 46 gal tank. A few minutes later the light goes out and the gauge is back at full. So the...

Got the truck back today. 73 mile test ride ran great. Dave is the Man. Daves Garage LLC Canterbury CT. New head gasket, EBP sensor, 2 New Exhaust Manifold w gasket, New water pump, Oil cooler 2 New injector for cyl 1 & 7, Upgrade to Studs, Dipstick tube, Glow Plug Harness and New Transmission...

Fumoto Valve is the way to go. I have three of them on my truck 1 oil and 2 coolant drains

Ok Got the word need new head gaskets. all cause by a bad EBP censer.

Blue Goose There is 185 k on her. Sparky83 It's over my head what happen. watch it be something simple like a bad EBP. I just work on the thermostat and had to move it. let know what happens.

The Truck is going to the shop on Monday. Dave will look it over and let me know.

I little more info. Was in panic mode. As i was pressing the throttle my Boost when high 30+ and ECT when to 234 and EOT to 215. So thinking that the turbo when bad and over boost, possible lifting the head causing the lost coolant. My Mechanic will be back on Morning, going to be a long weekend.

This morning I had a problem with the truck has I was getting on the parkway for home I press on the pedal and noting no power and then lots of power, I as I got to the top of the hill it seam to got better but started to over heat. So I slow down and all seam to go back to normal. I look up...

Ok it was the Thermostat got it change out . test, it opens at a lower temp. now to replaced the clamp that haled the fuel line. lost it somewhere. Thanks blacksnapon.

I Did an Coolant flush and use restore and vc-9 and changing to red coolant, I couldn't get out the Thermostat because of the return fuel. I could not get it lose. So I did a 3 day 21 gallon distill water flush. This morning the coolant temp on my Scangage is read 166 to 170 ECT and EOT...

I don't think it past saving. I seen worse. but it's there and I don't what it to look like a rusted old truck, with holes in the panels, bumper

So 9 years ago I installed a Transfer flow 46 gal fuel tank, I like it but the paint has fallen off and the tank is showing rust. I thought I pull it off and paint it, well let say it was not as easy to pull and it was to install. I started with Hand tools move to air tools and lastly the Saw...

.Can this disable or bypassed

Does My 04 have one and what information does it Record, I see that the Feds want them in all cars by 2014.

I'm at 160 K and running good. Just had to replace the ball joints. lastest oil report came back good. It's my daily drive in the winter. I just love it. But $80 a week for fuel is a bummer. Go 6.0

There is a test port on the Sec/top fuel filter that you can use. I don't have one but thought about it. good luck

I was under the truck yesterday and notice the Oil pan is getting rusty. What would be the best way to address this.

Would there be a OBC II code for this. just so I know Thanks

I think the Y pipe first, four bolt & nuts easy fix. new hareware the exhaust manafold are boltrd to the block and have been there a while. how hard is it to replaced one of them.

Hi Guys. Just got back form a trip to South Dakota, the truck ran great, I average 15.8 MPG speeding along at 70 to 75 in South Dakota 80. There is one thing I noticed, My Scan gage is showing less mileage then my Odometer. I track it for a while and it worked out to be that my odometer is...

I look for price and fuel turn over, like truck stops or Station that get a lot of truck Business. And I also use Powerservice fuel treatment.

Ok I 'll look into that thanks

Is there a drawing of how this line runs my 4x4 is not working, I have the HUB in manual. this just started. MY heat work great.Thanks

I drive 99 miles to see my tech. Thanks Dave. Just having someone you know to work on your truck is like that warm glow after..... after you get your truck back. Again Thanks to all the Tech here.

Morning All I got the new parts and Install them Myself took me about 4 Hrs. Dealer quoted 3 hrs@ 98 an hrs. So here are the pic of the Old/bad parts. Thanks for all the help.