Unlimited Cash

[Ridgerunner]

If you had unlimited cash what would you do to turn your truck into a dream truck?

 

[radialarm]

My truck is a dream truck to me, but if it would attract babes like the one in the "Cars & Babes" thread then that would have to be it!!!

I would also have to get Tex his dent side short bed!!!

 

[Ridgerunner]

My truck is a dream truck to me, but if it would attract babes like the one in the "Cars & Babes" thread then that would have to be it!!!

I would also have to get Tex his dent side short bed!!!

Tex wouldn't know what to do with a shorty

 

[radialarm]

Tex wouldn't know what to do with a shorty

Oh, I'm certain he could find something "Wackey" to do to it!!!

He's a perv!!!

 

[m78]

My truck is a dream truck to me, but if it would attract babes like the one in the "Cars & Babes" thread then that would have to be it!!!

I would also have to get Tex his dent side short bed!!!

Unlimited cash is what attracts those babes. It's not the cars

 

[radialarm]

Unlimited cash is what attracts those babes. It's not the cars

That's the truth, Brother!!!

Good looking, winning personality, and hung like a mule don't get you anywhere any more!!!

 

[john112deere]

OK...I don't have a dent, but with unlimited cash, I'd buy one. Possibly more than one...

I'd have a '76 F-250 4x4, with a warmed-up 390, 4-speed. Pretty well stock, but add in some sound insulation, an overdrive, and a few other "convenience features".

 

[Blade]

1968 Shelby GT500 or 1969

 

[Ridgerunner]

1968 Shelby GT500 or 1969

Nothing wrong with that. But what about your truck?

 

[TexasNomad]

I would do a frame off Resto drop a custom built 400 with a Retro Tek Boss EFI system mated to a custom AOD with a Gear Vendor unit.
With a bad ass Stereo system
Some Micky Thompson tires wrapped around some Custom CNC Turbine rims

 

[Ridgerunner]

I would do a frame off Resto drop a custom built 400 with a Retro Tek Boss EFI system mated to a custom AOD with a Gear Vendor unit.
With a bad ass Stereo system
Some Micky Thompson tires wrapped around some Custom CNC Turbine rims

Is that all? Color interior sounds like you have already planned this out.

 

[TexasNomad]

I would do a frame off Resto drop a custom built 400 with a Retro Tek Boss EFI system mated to a custom AOD with a Gear Vendor unit.
With a bad ass Stereo system
Some Micky Thompson tires wrapped around some Custom CNC Turbine rims

Is that all? Color interior sounds like you have already planned this out.

Sorry!
Interior would be all deep blue Leather all Interior lighting would be Blue LEDs.
Gauges would be Dakota Digital.
Also all exterior lighting would be LED.
Color of the truck would stay the same and I would keep all the Race track Style chrome
Roll pan the rear
The only thing different about the paint I would do is get allot of Air brush work done
The frame would be powdered coated a dark purple the tranny and rear would be yellow.
Suicide the doors and shave the handles cut the top a few inches and thats about it.

 

[Mil1ion]

Believe it or not...my truck achieved being my Dream truck in 1991 after 13 years and a labour of love with very little money in my possession.
I lived that dream for 12 years until I got an owie on the right front fender hitting a short post at a recycling depot.

I am now trying to get it back to its glory days little by little..with little money to do it with.. So if I had the3 backs it would go to bringing back to those days 1991-2004.

 

[Ridgerunner]

Sweet Dennis

 

[89frankenford]

hmm ive thought about this numerous times before....hell i even did a photoshop picture of my truck turned into my ideal truck!...too bad the pic is at the college i used to go to until i graduated...


ok so mine wouldnt be to crazy but definitely different.

just for specs, 1989 Ford F-150 XLT LARIAT

7.3L Turbo Diesel
5 speed trans
dana 60's
frame boxed and stiffened up also painted
NO LIFT!....well maybe 2 inches but thats it...the tires will make the lift for what i want
better sound system, cb radio, ham radio, GPS, scanner, weather screen
leather seats, in dash entertainment center controlling the music, weather, gps, and 100% tuning capabilities for the engine, sunroof!, full brush guard, roll bar attached to the frame, bronco spare tire carrier in back, 35" Mud tires, armor plating in the cab and doors as well as the rest of the body, bullett proof glass, CUP HOLDERS!!!.... a .50 cal turret gun mount in the bed, snorkel(both intake and exhaust), GRABBER GREEN PAINT, winches both front and back and winch point on the sides as well, roll cage inside the cab and bed reinforced, a water faucet in the truck with a 5 gallon container somewhere in the truck feedin the faucet with spring water, a water purifier in the water tank, skid plates all under the truck, spot lights, and keep all the other accessories on the truck i have now(cab lights, visor, toolbox, rear slider, and such) im sure i can think of the other things i missed later



uhhhh woops i am very sorry i had know idea this was in the generation 6 forum i do apologize.

 

[Raptor22]

hmm ive thought about this numerous times before....hell i even did a photoshop picture of my truck turned into my ideal truck!...too bad the pic is at the college i used to go to until i graduated...


ok so mine wouldnt be to crazy but definitely different.

just for specs, 1989 Ford F-150 XLT LARIAT

7.3L Turbo Diesel
5 speed trans
dana 60's
frame boxed and stiffened up also painted
NO LIFT!....well maybe 2 inches but thats it...the tires will make the lift for what i want
better sound system, cb radio, ham radio, GPS, scanner, weather screen
leather seats, in dash entertainment center controlling the music, weather, gps, and 100% tuning capabilities for the engine, sunroof!, full brush guard, roll bar attached to the frame, bronco spare tire carrier in back, 35" Mud tires, armor plating in the cab and doors as well as the rest of the body, bullett proof glass, CUP HOLDERS!!!.... a .50 cal turret gun mount in the bed, snorkel(both intake and exhaust), GRABBER GREEN PAINT, winches both front and back and winch point on the sides as well, roll cage inside the cab and bed reinforced, a water faucet in the truck with a 5 gallon container somewhere in the truck feedin the faucet with spring water, a water purifier in the water tank, skid plates all under the truck, spot lights, and keep all the other accessories on the truck i have now(cab lights, visor, toolbox, rear slider, and such) im sure i can think of the other things i missed later

Thats awesome Travis.

My Truck would be:

1989 Ford F150 XLT Lariat

4.9L/300ci Inline 6cyl
Medium Size twin Turbochargers
2x 3pipe Headers
ZF 5speed
4inch Suspension lift
35" Mud Terrains
Dana 60s
Fortified frame
Dual fuel tanks
Working A/C (R134a)
Replaced interior
New Paint Job
New Trim

I would love for my truck to look like the Walking Tall truck but better (chrome trim, cool motor).

 

[polarbear]

Unlimited funds? I'd have to pass the dentside and go directly to a street-rod fat-fender.

 

[fatherdoug]

I'd call a tow service and have them tow Ben's '77 to Montana.

 

[m78]

If I had unlimited cash, I'd go out to my garage , look at my truck and be satisfied with it

 

[dakonthemountain]

Unlimited??!! Wow what a concept! Well, I would do a complete frame off resto on Burt to Factory, all NOS, except I would keep the surround system I have in him and give him 4 wheel disc brakes and, believe it or not, I'd also keep the chrome rims I have on him now. I just like them. Oh, and I'd keep the 1 ton HD Dana 70 rear end and airshocks, oh, and ...........oh S(*& I would just paint him back to factory like I am already planning on doing and frame off clean/paint the rest.

Then I would buy an 73 4x4 for fun! (all factory new of course!) and then steal Ben's big Red...
Dak