Transmission is a...?

[Jeremy_Hannah_58]

Hello, I have a 94 F-250 4x4 with a 351 engine and a Dana 50 IFS and Dana 60 rear. Just a quick question, I have a 5 speed manual transmission, so what the heck is it?

 

[Fellro]

It would have to be a ZF.

 

[5.0Flareside]

zf-5 speed..

 

[O'Rattlecan]

That's the manual transmission to have!

Ryan

 

[Alvin in AZ]

Nothing quite like a picture... ?

...2wd ZF from a '90 F250 >8500#, those X's are a dead give-away.

Don't got a picture of a Mazda.

----------------------------------------------------

The Mazda is a close-ratio transmission and you pretty much have
to start off from 1st gear. :/

Most (all?) of the gas-engine ZF's are wide ratio with a granny gear.

Gear ratios...
1st 2nd 3rd 4th 5th -R-
T18 ========== 6.32 3.09 1.69 1.00 === r7.44
ZF M5OD-HD === 5.72 2.94 1.61 1.00 0.76 r5.24
Mazda M5OD-R2 = 3.91 2.24 1.49 1.00 0.80 r3.39
NP435 ======== 6.69 3.34 1.74 1.00 === r8.26
E4OD ========= 2.71 1.53 1.00 === 0.71 r2.18
Clark282V =====- 6.99 4.09 2.17 1.17 1.00 r5.89
NV 4500 ======= 5.61 3.04 1.67 1.00 0.73 r5.61
T19 = http://www.novak-adapt.com/images/graphics/t19_specs_gasket.gif

My ZF's 5.72 is too high for 1st gear, it should be >6.00, IMO.
And reverse is too high too, ~6.00 would be better, IMO.

--------------------------------------------

While I'm at it here's my favorite automatic transmission picture...

...ain't that a pretty sight?

That big ol' hunk of second-guessing-crap is outta there! xD

Alvin in AZ

 

[m78]

Alvin , whats that pan the trans sitting in ? Looks like an old washing machine base on casters.

 

[Alvin in AZ]

Alvin , whats that pan the trans sitting in ?
Looks like an old washing machine base on casters.

That's -exactly- what it is! Had it since '79 with my first
clutch job on my '75 F150 360FE +T18.

I flipped it over between pictures, see it?

I was always afraid to pull it with the sharp metal down. :/

The edge shown with the E4od on it is the "high" edge and
that edge isn't any good to grab so had to use the "low"
edges. On un-even ground and with weight on it, it always
spooked me so I mostly pushed it around with my feet. xD

Finally got around to putting the wheels on the other side
and like it way-better now.

Got another one since then.
Anybody close want one? LOL

Alvin in AZ