More work on the SD

[95F350XL]

Soo, its been a few weeks since I did anything, now here is the latest update. I swapped the towing mirrors on, fixed the door lock actuators, reprogramed the keyless remotes. Now that all works. I have got all the parts for the 05 front end swap. New Grill,emblems, headlights, header panel, bumper, and upper bumper. Just waiting for the upper bumper to come back from paint. Bushwacker Pocket style fender flares are painted and waiting to get put on. New tailgate has been painted and installed. Meyer plow framing has been found and will go on when I do the swap. I will hope I dont have to use this truck to plow, but just incase the bronco goes down. Also changed all the coils. I have rear ujoints, and the carrier bearing to change also.

 

[slmann]

keeps getting better and better

 

[Beach66Bum]

Really sharp !

 

[95F350XL]

Yea I cant leave it alone lol, im sure everone here knows that with the way my stuff is haha

 

[Skandocious]

Of all your trucks why is THIS one not a candidate to plowing? Seems like it'd be a shoe-in because it doesn't have fresh paint and it does have a heavier duty drivetrain.

 

[95F350XL]

It will be back up plow truck, its too big, and turns like crap lol

 

[Skandocious]

Ah, I suppose that makes sense

 

[95F350XL]

The bronk trans is an unknown right now. Could be orig at 154k, maybe changed, I donno. Ill just changed the trans fluid when I do my oil change and maybe it wont crap out. I use low for almost all plowing as the 5.0 has no power lol

 

[95F350XL]

OK here we go more work, did the rear u joints and center support bearing. The u joints were still good a 239k(Ford logo was still stamped in) the center support had no bearings left in it. My truck had a sound like the rear was making noise, but when I did the fluids it all looked good. My noise is gone now! Yes