Dana 44 U Joints?

[Riotnrrd]

While replacing some suspension components I noticed my Front Driver's U joint on the Dana 44 axle shaft is in bad shape. Its wiggling around a lot and looks generally busted.

What do I need to know about axle shaft U joints? I read Spicers are nice and lean towards non-lubed versions (stronger? easier?), but I don't know what size or kind or where to get. I'm flexible as to brand but don't want to spend a whole lot of money.

 

[UNRULEE]

Make sure that both yokes are in good shape. Look for even the slightest "egg" shape of the holes that the caps are pressed into.

Here's some u-joints. http://broncograveyard.com/bronco/i-22056-d44-axle-shaft-u-joint-spicer.html

 

[Mil1ion]

One has to be careful when buying U-Joints for these trucks...as there are So many applications.

You will need to post the BOM number of the front axle and the build date of the truck.

 

[1985 Ford F-150]

Id just pull the old one out and go down to the parts store theyll have em.

 

[Riotnrrd]

It's a 1979 F-150 4x4, I'll try and pull the BOM number this afternoon.

From what I'm reading models from this year used Dana Spicer 5-297X U Joints.

Also I read that some time ago Spicer went to a new design (supposedly stronger), the 5-760X.

Am I way off base here?

References:
http://www.therangerstation.com/tech_library/Dana44.htm
http://www.4wheeloffroad.com/products/131_0212_5_760x_spicer_u_joint_jeeps/index.html
http://www.dennysdriveshaft.com/p47...nance_free_4x4_front_axle_universal_join.html

 

[1985 Ford F-150]

I did some summer before last and didnt have any trouble gettin em from Napa.

 

[4wydnr]

I personally am not a big fan of napa u-joints. I've used them on my superduty and was not impressed. They didn't last long enough for the price. That's just my opinion.

 

[smokey]

I normally get the Moog joints they seem to hold up fairly well.

 

[LEB Ben]

Dana/Spicer or Moog get my vote.