a few issues with the new truck

[Fordzilla80]

That upper intake plenum really suck to get the bolt inside.

That's the same problem my dad and I had.There's one bolt that goes right through the center of the plenum and there's barely any room for a socket.

 

[1985 Ford F-150]

There wasnt room for ours we also tried to chisel a slot in it to use a flat tip screw driver to get it off but we couldnt get the chisel to dig in.

 

[95F350XL]

You can just get the torx bit, that fits into a 1/4 socket. So this is how I do it, a long torx, in a 1/4" 1/4 drive with a 1/4 extension then a 1/4 to 3/8 adaptor and the rest you can fig out. I did finally buy the propper 1 from snap on for 25 bucks.

 

[1985 Ford F-150]

I think when we put it back on we did somethin like that.