My son's Ranger had the outside bearing disintegrate on him. He had to drive it about 10 miles to get it home because we have been getting snow and the tow trucks are prowling all parking lots looking for easy money.
Needless to say, the outside bearing (what was left of it) welded itself to the spindle. We tried heat, and a little coaxing from a hammer and also a puller to try and get it off.
Before my son gets in over his head, does the spindle come separate from the steering knuckle, or does he need to buy the knuckle assembly? Any warnings against going to a salvage yard for this?
It's -20 here in Joliet tonight and he is on the low budget plan. He's hoping to do it this weekend in a unheated garage so going the easiest route is what we are after. Thanks in advance!
Jim
Needless to say, the outside bearing (what was left of it) welded itself to the spindle. We tried heat, and a little coaxing from a hammer and also a puller to try and get it off.
Before my son gets in over his head, does the spindle come separate from the steering knuckle, or does he need to buy the knuckle assembly? Any warnings against going to a salvage yard for this?
It's -20 here in Joliet tonight and he is on the low budget plan. He's hoping to do it this weekend in a unheated garage so going the easiest route is what we are after. Thanks in advance!
Jim