both right. I figure a few grand for interior. I was going to get her a King Ranch interior and that starts at $1500 to $5000 depending on condition for take offs. I was going to get her the dark leather with lacing. She said nope she wants the stock ones done up instead. I have been using SMS...
Wife wants leather in a 74 SB CC. Seat are ok but I want her happy so I can keep buying my toys Anyone recovered their stock seats in leather? looking into material that will last not just painted leather like what you see in new vehicles. Anyone have a great source or someone that does mail...
BSW if possible grab the entire front axle and associated parts from a 78-79 Bronco. we did it to my sons 75 Explorer. Got the PS too thats on the outside of the frame which is better than the inner. I did have to reverse the innards on the 79 box but it was easy using parts off a Bronco II...
You would think that both sides would not go out at the same exact time though. Going to install new SS lines but, still thinking it may be something up the system for it to bilaterally act up simultaneously. Good call tho.
I had just come back from AutoZone buying a new or rebuilt power steering pump for my 1979 F-250 2 wheel drive super cab short bed. on the way home I started smelling what could only be described as burnt clutch well I have an automatic behind a 460 so I know it wasn't the transmission upon...
I got the front and rear factory swaybars of a 79 Bronco and have installed the rear, but the front is giving me troubles. I mounted the drivers side as it index's on the pumpkin, just like the 1979. On the passenger side, it is different since the 78-79 have the cast knuckle/wedges/tracbar...
Just finished the PS conversion from manual on my sons 75. && rebuilt pump all new custom hardlines and short rubber to connect where needed. Filled it and cranked the motor a few cycles fill again so on and so on. Got it to what looks to be topped off. Started it up fully not just cranking...
Just finished the PS conversion from manual on my sons 75. It has a rebuilt pump all new custom hardlines and short rubber to connect where needed. Filled it and cranked the motor a few cycles fill again so on and so on. Got it to what looks to be topped off. Started it up fully not just...
Need to get the spline count on the lower column shaft on a 1975 f100 4x4 with manual steering. I cant get the upper joint to come off, even after soaking it for days. I need to order the new u-joints and need to be certain of what it is. can anyone tell me what the count is definitively? Thx.
Just got my son a 75 4x4 f100 has a 390 and np435.It has strongarm steering and i need to get power steering for him. Let me know what you have and what you need, must be able to ship to 93612. Not sure if it matters but the stock box is mounted on the outside of the frame. The truck has a hi...
Just got my son a 75 F100 4x4. It has a hi pinion with drums( wasnt sure they had hi pin till 78). It has muscle steering and I want him to be safe as this is his first ride and strong arming it and shifting the np435 is not good in my eye with a novice at the wheel. I have a line on an early...
WOOHOOOOOOOO Passed My CA SMog !!!!!!!!!!Well took the 79 F250 SCSB yesterday to get smogged and it finally passed. So it is all good for another 2 years and first time, since 2010. Getting 12mpg pretty consistently and it is so quiet an smooth and under the radar with the stock exhaust(...
Not the smog pump. I disconnected the hose to the divertor and without disconnecting the hose to the divertor and revved the motor pumps out volumes or no divertor pumps good too. So what is keeping it from getting more air in there?
Many people term the ones made by a company called West Coast and the same design that has the Ford logo inscribed as one and the same. I have a set of the Ford high mount 3 point mirrors. $150 shipped to your door. If these are the ones and you are interested txt me to (559)2832008 my Paypal...
Bill the actuator on the snout works when vacuum is applied. I am thinking it is that sensor on the bottom of the cleaner, isn't that what allows the vacuum to be present or not in the air cleaner or is it that other one on the side that the hose to the actuator on the snorkel connects to?
After a few weeks hiatus I am back to work on the 79 F250 460 auto in CA. I was messing with the timing as it seems that the distributor moved and kicked it out of the legal limit. I reset it to 14* like the tag and smog guy quoted me. I got to thinking what he had said made it fail. He said...
After a few weeks hiatus iI am back to work on the 79 F250 460 auto in CA. I was messing with the timing as it seems that the distributor moved and kicked it out of the legal limit. I reset it to 14* like the tag and smog guy quoted me. I got to thinking what he had said made it fail. He said...
Sorry guys change of plan. Someone came by and asked to buy what we had just brought home. Offered a ridiculous amount of $ and it is now gone. He had stopped before to look at mine but never caught anyone home. He came by and doubled what we paid for the truck, so my son is again F-less and in...