Prothane 6-110 cab/body mounts

[wareagle]

Any every use these? there are 12 pieces in the box, 4 for the front cab mounts and 4 for the rear mounts. Summit said the other 4 were for the radiator support. The instructions said that the bushings go on starting from the front to the read and give the serial# for each. Was just curious if by the front of the cab they are talking about the radiator or the cab. The description for all the serial numbers in the kit just says body mount...

 

[73F100Shortbed]

If it specifically said start at the front of the cab I would assume they mean the cab and not the radiator, but with the way they write instructions today it could very well mean the rad. support

 

[wareagle]

Yeah, I'm gonna give them a call Monday. Tried yesterday but they close at noon on Fridays. Must be nice, huh?

 

[73F100Shortbed]

They close early to write the goofy instructions

 

[wareagle]

sounds like it... Least they could have done was make the description of each of the parts different instead of having all of them say body mount... But, one good thing is the serial# is stamped on each bushing...

 

[1985 Ford F-150]

The core support bushings should have a little sleeve and two washers for each side along with the rubber. Id start from the core support and go back. Dont know if you plan on pullin the body off the frame or what but the old core support bushings will need to be cut out if theyve rusted.

 

[wareagle]

Prothane's kit does not come with washers. Just a box of bushings of different sizes.

 

[wareagle]

E-mailed Prothane this morning asking what their various part numbers in kit 6-110 represented and why there were 4 extra bushings in the box. Also asked them if the 4 extra bushings represented the radiator mounts or not... Will see what they have to say...