Picked Up A Lift

[95F350XL]

So my friend had a bronk and he got a 2" lift from a friend and wrecked his bronk, so I got it from him now. Its got new coils, 6 shocks, drop pitman, and 2 add-a-leafs for the rear. Now do I need any other brackets to drop the front diff down? Will 2" make my tires go like this \ / caus its down further? I figure id ask before I do it lol.

 

[Skandocious]

Tough to say with a 2" lift, that's pretty small. You could do some research on 2" lift kits and see if they come with pivot arm drop brackets.

 

[Lost]

Dont need drop bracket really . The F350 coils r 1 3/4 " Higher than F150 on the norm.

U can get after market HD Chamber kits for in it . I do this with my F350 coils installs. Will take care \ /

My Shop has theses in stock but most dont. They r sold by most lift kit builders

Also JC whiteny use to sell a adjustible center pivot kit to do this.

Id check with lift builder first

Good luck

 

[95F350XL]

The HD camber kit, is it an adjuster for the ball joints? Like youd pull the factory plug out of the top ball joint and put an ecentric type one in? Pics would be awsome.