lost again

[builderick]

ok i have pictures below intake fits both engines the same i helped take it apart but had a friend help me not sure what i am missing that goes in this spot behind intake on passenger side but gasket has a bead and extra bolt hole that intake does not cover a pic would be best thanks

http://s1110.photobucket.com/albums/h459/despotic1/

 

[lil_dq]

The Passenger side head on these motors have a dead spot. If you look closely at it the hole that is on the head goes all the way through and you can see daylight on the bottom side.

BEWARE!!!!!! Intake gaskets will interchange on the heads, BUT THEY ONLY GO ONE WAY!!! MAKE SURE YOU HAVE THE GASKET AROUND THE T-STAT OPENING CORRECT OR IT WILL LEAK LIKE A B****!!!!!!!

 

[blacksnapon]

BEWARE!!!!!! Intake gaskets will interchange on the heads, BUT THEY ONLY GO ONE WAY!!! MAKE SURE YOU HAVE THE GASKET AROUND THE T-STAT OPENING CORRECT OR IT WILL LEAK LIKE A B****!!!!!!!

And you know this how?

 

[Blue Goose]

BEWARE!!!!!! Intake gaskets will interchange on the heads, BUT THEY ONLY GO ONE WAY!!! MAKE SURE YOU HAVE THE GASKET AROUND THE T-STAT OPENING CORRECT OR IT WILL LEAK LIKE A B****!!!!!!!

And you know this how?

 

[Austin]

I second that.

 

[lil_dq]

Found out on about engine 3 the hard way!

 

[slmann]

by now Doc may be able to give Vince some tips on working on this generation truck.

 

[O'Rattlecan]

by now Doc may be able to give Vince some tips on working on this generation truck.

Reps.......

Ryan