1950 F1 Project

[F1Dave]

So I'll go ahead and start a new post to share my build progress, instead of using the "My First Post" thread. I won't repost the same pictures, but I'll show you the list I'm working off of and will of course add pictures as I progress. If you've got any suggestions or tips please feel free to share!

 

[slmann]

just want to subscribe for future updates.

thanks for taking the time to start a build thread on our site.

 

[DNFXDLI]

 

[F1Dave]

So not as much progress this weekend as I'd hoped, but I got a little done. Since the bed was welded to the cross-members, I decided to try and cut the bed out and remove as one piece. Not happening by myself, so I will be removing the bed in pieces. Here you can see where I cut through the bed to start freeing the bottom panel from the cross-members (I have to cut three of these), and then at my stopping point this weekend is one side panel removed.

 

[EdKenleyFordUT]

Very cool! Good luck on the rest!