That was snapped off flush with the top of the box...
also going to have to drop the oil pan... the tool wouldnt find the magnet to come out.. oreillys had some felpro permadry ones for the pans and valve covers... have had good luck with them in the past so gonna use them to seal both of those... now i gotta wait for tuesday for the truck to arrive...
didnt take any.. but will this weekend.. all i did was unload them from dads truck and threw them in the back of my truck. still need to clean the other parts i took off and the get that tool out of the pan.. lol
btw vince can you tell me what those 4 - 1" wide round gaskets are for that are there in the center? didnt remember seeing ones like it when i took the covers off. I got the set for both sides but only has 4 so doesnt seem to be for the injectors. they look similar to the ones between the intake plenum.
Hmmm will have to look now.. Was. Going to try pulling that apart and see if the o-ring was in there for the ccv tube.. Been missing since I got the truck.. I made a clip to hold it down in there.. Now that gives me even more of a reason to pull it apart..