Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

Recent content by tboss619

  1. fuel pump test??

    I posted this on electrical but got no response so I will try here,,,which two pins do I jump in the OBD-1 test plug on a 1994 E 350 ford with a 460 engine I need to test my pump and pressures as I am having some idle and rev up issues..I did this a long time ago but was a lot younger and I...
  2. where can I get one of these..??

    I have a 1994 Ford E-350 ,There is a recall to install a inline fuse in the wire going to the cruise control switch on the master cyl on the bakes.. My problem is I live a long ways from the dealer who can install it ..My guestion is does anybody have a description of this inline fuse or...
  3. how do I ??? fuel issue

    what pins do I cross in the obd1 test plug to run the fuel pump koeo for test purposes??
  4. how to run fuel pump KOEO for test..

    what two pins on the OBD1 test plug under the hood ,,drivers side fender on a 1994 Ford E-350 do I cross to run fuel pump cont. for test purposes. I have done it in the past but cant remember the pins ..I guess being 75 aint all its crapped up to be. TKS for4 helping an old fart out.smilieFordlogo
  5. shutting off

    tks for the heads upI forgot abt the spam skamers . smilieIagree
  6. shutting off

    dd you solve the rough running problem ,,If so can you pls explain wt they did to repair it..mine is doing the same thing. realize this is an old thread but Im abt ready to shoot the truck and pronounce dead on arrival..tks terry you can also email me at .:guns:
  7. spongy ped

    I had the brake fluid changed on my 1993 e350 last year and now I have a spongy pedal I can push the pedal all the way to the floor if I push it fairly hard. It seems to stop just fine but I am worried abt the spongy pedal..my mech. said it is supposed to do that and its a bypass vlv in the MC...
  8. idle and skip problem...

    sorry I didnt give enough info,,the plugs,wires dizzy cap and rotary button all new..I removed the iac and cleaned it good and it didnt help,,perhaps you are rite abt the iac it must be bad ,,I will try a new one but the skip will still be there Im sure...any more suggestions,, each time the...
  9. idle and skip problem...

    I am new to the forum and have a question abt a intermitant skip and an up and down idle on my 460 1994 fuel injected engine,,can a bad ICM be causing this prob. and if so where is it be located on a 1994 coachman motor home class C If I had a pic of it and the location it wld help,,,tks...
  10. well passed state inspection

    truck emissionsJst let the new energy bill pass the senate to become law and we all will ahve to do the emmisions inspection and they are gonna be a lot more strick than they are now... I lived in Ga and my f100 wldnt pass after 3 tryes so it was either sell my truck or move to florida so I...
  11. Left Side Rust Out

    my 81 had a rubber gromett in the bottom of the space and I removed it so the warer cld run out ,,,,if yours dont have the grommett then drill you a 1/2 in hole and go to the hrdwre store and buy a open gromet to place in the whole ,,,the open gromet will allow the wate to drain from the...
  12. any one ever use this product

    I have a slight skip in my 460 and was thinkin abt trying lucas oil fuel treatment to see if its one of the enjectors sticking and needs cleaning...I know I mentioned a product name and if thats a no-no then the moderator can remove for me as I dont want to do anything to get kicked off the...
  13. help with a recall

    got a recal notice on my 1994 e-350 for the cruise control sys. can someone send me a pic of this recall fix ( i think all it is is a fuse link ) . I can install a fuse link myself and its a long drive to the nearest ford dealrship in my little town.. I need a pic of where it goes on the system...
  14. Cab air filter?

    where is the frame ground connection on a 1994 e-350
Top