I have a DANA 60 3/4 ton rear axle. When I bought the truck the emergency brake cables were not hooked up so I removed the hub and put the cable on and they are too short. I am thinking these cables are for a 1/2 ton with whatever was in it. Are the cables different lengths or what? If so I need a set that will fit a swb truck with a dana 60. also there is oil on my drum. when I took the keepers and bearing out they were barely snug. How tight should they be b/f you bend the keeper tabs. The seal looked good, but I might replace it just to be safe. Help me out fellas.