Does anyone know where I can find information on rebuilding my steering sector? The ball bearings came out of there groove when I pulled the input end off. I can make sense of it, after I pulled the output side up and pulled my input side out. It appears that you feed the ball bearings through the small piece of tubing that must allow the bearings to cycle around the input side grooves. I'm sure there is a process to feed them into the box.
That is why I'm only getting 1.5 revolutions on my box.
1977 F-150 with power steering. The tag says:
SPA BT
77E 13B
thanks -
Dan
That is why I'm only getting 1.5 revolutions on my box.
1977 F-150 with power steering. The tag says:
SPA BT
77E 13B
thanks -
Dan
Last edited: