Spicer ujoints for 77 F250

[roughneck]

Anyone know the Spicer # for front axle u-joints? Dana 44 lowpinion. 1977 F250 highboy.
Its before Y200001. Not a 78 -79 low boy truck.
Although they may be the same joint.

 

[Jasperrc]

It may depend on which transfer case you have, part time or full time 4wd.

Dana has a parts finder that may help: http://www2.dana.com/expertforms/dek350.aspx

 

[fatherdoug]

You might also try this sight - Torque King 4X4. They've been in business for about 30 years, and they have Spicer make U joints for them according to Torque King specs.

It looks like the U joints for a F-250 from 76 - 88 will work, as long as it is the Dana 44 axle.

http://www.quad4x4.com/cgi-bin/commerce.cgi?preadd=acton&key=40712

 

[fatherdoug]

Anyone know the Spicer # for front axle u-joints? Dana 44 lowpinion. 1977 F250 highboy.
Its before Y200001. Not a 78 -79 low boy truck.
Although they may be the same joint.

The information I'm seeing shows a cutoff number of Y80001?

 

[Jasperrc]

The spicer site shows different numbers for wheel joints but it depends more on whether you have full or part time 4wd not whether it is pre or post 77.5.

These are for pre-77:
For full time 4wd, there are options depending on the bearing cup diameter:
5-760X Wheel Joint w/1.188 Brg. cup dia.
5-3226X Wheel Joint w/1.188 Brg. cup dia. Lube fitting in brg. cup
SPL55-3X Wheel Joint w/1.375 Brg. Cap Dia.

For part time 4wd
5-260X Wheel Joint w/inside snap rings
5-1350X Wheel Joint w/outside snap rings

Hope this helps!

 

[roughneck]

77 Spicer #s

Thanks for the info gentlemen!!