89frankenford
Grabber Green Consultant
ok so when i went and took my truck for a 5 hour drive to bangor maine i noticed at 65mph it would almost (misfire or die out or clunk or something!) then it went away when i got home. well today it was clunking from the tranny/crossmember or radius arm bushing area. not like a clunk i mean a CLUNK! to the point where it sounds REALLY bad. and i have a random misfire or quick dieout. lasts no more then 1/2 a second and goes normal. tomorrow im going to recheck my crossmember bolts to make sure they are tight from when i put the tranny back in since i welded the case back together. im also going to check the tranny to engine bolts and the tranny mount bolts as well. im thinking it maybe my radius arm bushings too. because sometimes when i come to a stop i get down to about 5 mph and i hear a clunk right before i stop. i know its not a braking issue but i think it maybe something with the bushings in the radius arm causing that. any thoughts? or suggestions?