LEB Ben
Arrogant A-hole At-Large
...gets to buy a cam. That's right, this guy, right here. Went to throw the Bronco back together, was tq'ing down the cam bolt to spec and it sheered right off...about 5/8" from the head. I'm gonna try a left handed carbide bit and an easy out...but the outlook appears grim. The cam bolt is 5/16-18 right?
Now for the newbie question(s). I plan on throwing in the Comp Cams XE262:
http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=847&sb=2
Now all I should need are new lifters and springs with that cam, right? No need for new push rods? And then there is mention of retainers and locks...dunno what tha means or if I need them. Can someone please straighten me out...never done this by myself or had someone else do it for me. So let me know what I actually need. Besides a carb and intake, it's a stock engine.. Thanks.
Now for the newbie question(s). I plan on throwing in the Comp Cams XE262:
http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=847&sb=2
Now all I should need are new lifters and springs with that cam, right? No need for new push rods? And then there is mention of retainers and locks...dunno what tha means or if I need them. Can someone please straighten me out...never done this by myself or had someone else do it for me. So let me know what I actually need. Besides a carb and intake, it's a stock engine.. Thanks.
Last edited: