- 69
- 0
Hey Guys; I'm finishing up a fiberglass tilt front end that was started by another mech. He fab'd some brackets to hinge off the nose of the frame. Not a very neat job. I need some ideas on what this should look like. Some of you fanatics have to have a nice bracket that you're proud of. I would like to take a peak. If you can help with a photo that would be awsome. What's the best setup for operating the electric cylinders up and down. I plan to wire an up and down button at the dash. I want to use a 12 volt relay to control the lift. I have to wire the circuit to reverse the polarity to move up and down. Are there some kits out there to get this done. What about a wiring diagram. Thanks in advance for your help. You ford fanatics are awsome.