- 4
- 0
I have a 2006 6.0 with 117000 miles on her.This is an E450.A few weeks ago a driver driving my truck said it was overheating almost to the red.I got the truck and started back to the shop and the temp was dropping.Got back and checked fluids and that was okay.I hooked up my scan tool and it said there was no communication with the fan.Sure enough the wires were pulled out by the fan.I replaced the unit and went for a drive.Everything was working great.I turned around to go back to the shop.While accelerating I got to about 2000 rpm's and I heard a loud bang and loss of power.limped back to the shop and didn't see anything wrong so I hooked my scan tool up again and got a 2262 code no turbo detected.I thought okay turbo so i pull turbo off and take apart.The unison ring and fingers were rusted up and wouldn't move.I replaced the turbo and checked the hoses.I scanned the system again and I get a 2262 code as well as 2263 code .Where should I look at and what could be wrong.There is no power and after accelerating it will go slow and then 2000 or more rpm's engine will miss and smoke like crazy