Sorry...try thesehttp://351cleveland.wikifoundry.com/page/Tod+Buttermore+Blockhttp://www.hotrod.com/events/popular-hot-rodding-engine-masters/2014/400ci-ford-cleveland-by-rcs-racing-engines-at-the-amsoil-engine-masters-challenge-2014/...

August 25, 2015 TMeyer Inc acquires "1st aftermarket Cleveland block"“Due to an unexpected increase of workload and an exciting new antique-engine project, I have closed a deal that has been in the works over the past couple of years with TMeyer, Inc. This arrangement will allow me to fulfill...

476 HP 511 TQ 400 Ford, Trick Flow heads, Big Thumpr flat tappet cam, Weiand intake.http://youtu.be/N89kpLQOah0?list=UUajQhjw4mpRsbvNIaWpTJmwhttp://youtu.be/zhTOyEF7GCw?list=UUajQhjw4mpRsbvNIaWpTJmw

2nd round Weiand 8010 503/507 TQ 473/475 HP

1st Round...ding!Edelbrock VS Weiand (Made in China version) intake manifold. 1st round, Edelbrock. 512/516 TQ 452/456 HP 24 degree full ignition advance.

We have a 400 with Trick Flow heads and flat tappet camshaft. We will be comparing the New Weiand intake manifold to the Edelbrock intake manifold.

Another 434 hits the "pump" Trick Flow heads, Hyd roller cam, C/R is about 10:1. Customer will be installing a blower.Here's couple videoshttp://youtu.be/7Y_WGpJyiOE?list=UUajQhjw4mpRsbvNIaWpTJmwhttp://youtu.be/pCWKmtICxJY?list=UUajQhjw4mpRsbvNIaWpTJmw

Cleveland fuel pump block off plate, TMI Everyday Price $29.99, An E-bay seller is price $86.24 includes shipping from Australia, TMI S&S special $22.50

Thank you!!It does make me feel kind of dumb.But as far as "boat anchors"I am feeling that with the latest builds, we have a 434 that has now made over 620 HP on the street, if it fits, it can be the better choice.Now the advantage that the 400 has, is in the last few years of being in a...

OK...I have totally screwed up now!!!The pictures that I have posted about the water outlet, I have them labeled backwards.The large hole, is the 351C outlet, but without the brass restrictor. Hence the larger hole.SO...the 351C (top-hat) style of thermostat should not be needed in the...

Happy Thanksgiving to all. TMeyer is planing our own version of "Black Friday" But we are calling it "Save & Share" and it starts Friday November 28th and goes to the end of the year.We hope you take the discounts you have saved, and share it with some needy families or individuals in your...

See...we are human. I went and looked and found a few other 400 blocks that look like the 351C water outlet.This thermostat we purchased from a local Carquest. We used it in a 351C engine. Part #30089, just a few bucks.

FYI...351C and 351M/400 do not use the same thermostat. 351M/400 do not require the "top hat" on the thermostat.351C block351M/400 block

We are very proud to announce the addition of AeroFlow Performance Products. TMeyer Inc is the ONLY dealer in the USA. We have a small order coming and we will be receiving orders on a regular basis, so if you see something in the catalog that we don't have, we will be glad to include it on...

Sorry I have not posted here for some time. Here's our latest 434 engines."Midnight Modified" 612 HP 579 TQBut carb needs some tweaking. Our 775 Demon made the 612 HP And the 850 Holley made the 579 TQ and less HP. Visiting with Holley. But it's a good start.

Check out our new web site. Give us your feed back, good, bad or ugly. http://www.tmeyerinc.com

Our goal..Is to offer the block in: 9.200, 9.350 & 9.500 deck heights. 4.000 & 4,125 bore sizes.We are building this first block for Terry Parker of Parker Racing in Australia. It will be a 4.135" bore size and 4.100 stroke to give us the 440 Cleveland.

I went to Ohio to meet with Tod Buttermore about his new 351C block on September 3rd. Come visit/like our facebook to see more pictures. https://www.facebook.com/pages/TMeyer-Inc-Precision-Automotive-Machining/173003588761Aluminum Blocks

What you will see in these pictures is the fixture we use. This fixture is designed to correct lifter bore alignment to the center line of the camshaft.Then I used the finishing reamer and partially started a few lifter bores. I did this to show the ridge and difference from the original...

No Expiration...Getting better deals, so giving better deals.

347 with 302 Cleveland heads. Comp Cams Thumpr roller cam.http://www.youtube.com/watch?v=hv9siu8iUv8&feature=share&list=UUajQhjw4mpRsbvNIaWpTJmwhttp://www.youtube.com/watch?v=shMsdaRpKTU&feature=share&list=UUajQhjw4mpRsbvNIaWpTJmw

We have been looking at our stroker kits pricing. Because we have been receiving better pricing from our vendors, we are choosing to pass on the deals. So at this point we are now able to add free balancing to the kits, which is a $250 value. So $2399 will get you a balanced 434 kit with flat...

like said before, I am not 400 bias, just Ford bias. There is no replacement for the size that the 460 can do. But I deal with people on a daily basis that people are considering pulling the 400 and putting the 460 in because the 400 is such a pooch. And in reality we have proven that the 400...

A little more 400 projects

400 to 460 comparisonNow first I need to say that I am not 400 bias, just Ford bias. Because of all this talk about dumping their 400/351M for a 460, we pulled up 2 dyno results we did on a 400 and a 460. I did my best to select comparable engine builds. Cam wise and compression. other wise...

http://www.youtube.com/watch?v=SipgiM0gvVA490 HP 525 TQ

Boy, a guy can't lurk around here at all!!

Yup, I have not seen a 1200 HP Cleveland, matter of fact there is no such thing as a 1200 HP Windsor either. You have to realize that the HP at that level, there is no more original parts involved. Crower, Dart, Oliver, Manley, Ford Racing are what those engines are all about. Chances are the...

Let me help you Duncan The main caps are manufactured for us by Pro-Gram Engineering. The intake gasket is manufactured for us by Cometic of a special material. The material has an aluminum core with a "rubber type" coating. Head gasket, just plain Fel-pro.

Yup, looks like the cam I suggested when you called me.