Iv got a 03 F350 and my rear brakes are disk with an Ebrake drum inside, I broke mine down myself and replaced the hub seals and really cleaned the brakes, the calipers are 2 part and brake dust can jam them up from retracting, use a parts washer and a dremmel tool.
the spring system on the...
I have found the answer, and it works great. I found it at biglots, silicone lube spray, like a cheep wd40. I spray it on lightly, and it soaks in quick and looks streaky, repete a few times and then rub with a towel, and they look new, and keep looking new even after washing and being in the...
the dyno on the motorcycle exhaust showed a HP increase, Im thinking If I built 2 of them 6 inches with 1 1/2 inch barrels it would be bad and remove the 50 pound muffler from my truck
I ran across this exhaust tip, and had the crazy idea to fab one for my 7.3
How big would I have to make this IF I made 2 of them for dual exhaust.
the company only makes them for motorcycleshttp://tailgunnerexhaust.com/rotary-cannon-exhaust08.php
turned out to be the oil cooler, cheep parts, major work.
iv been using the block heater. it only leeks when its real cold,
anyone know what the labor should be to replace the 0rings?
the other morning I started my truck up cold to move it into the garage to do some work on it, in the 90 seconds it was running It leaked out about 3 quarts of oil. I had a heavy trail of oil . I coldnt find the leak, I toped off the oil and warmed it up and not a drop came out, and it hasnt...
I had nothing to do today so I removed the cowl cover form my 02 f350.
it is pretty simple, about 6 screws and a few push fasteners , the wipers remove pretty simple also.
Why did I do this?
to check the AC intake for trash that smells and blocks airflow, to my surprise they hide the intake...
im game, I live just north of Chattanooga in a little town called Sale Creek. I just bought my 02 F350 2 weeks ago, all my household drives fords, my GF has an escape, her dad has an old F150 and a old Ford van, Her mom has a 08 F150.
I am a mod on another non truck forum
it has a big black dimond plate flatbed, made in OK, it came with the truck.
and custom step rails in black dimond plate, and a custom deer killer bumper
I used Ice liquid clay this morning, it is a waste of time and money.
Just wash with dawn dish soap ( it removes old wax) then use a clay bar, with detailer spray. then 2 coats of synthetic wax ( I dont like Ice wax) then 2 coats of carnuba .
The liquid clay is just a fancy soap used to remove...
I use tuff stuff foam cleaner, it works great, I can turn a towel black( I smoke)
dont use it on the sun visors, it may remove the sticky stuff and make them sagg
Same problem here, I soaked down the latches with liquid wrench, worked the doors a bunch , and the door ajar light stays on. Id like it to work properly , My kids ride with me sometimes, and I dont want them to fall out an open door