That's a good looking truck, now she has lots of room, good luck with it.

Sorry for the delay.Here's some pics.Sorry, I'm not smart enough to post pics. Send me a email address and I'll send pics to those that ask for them.

Send me an email address or click on the C/L link.

1998 Ford Expedition 4X4 Project - $2000 (VB 23452)I have the original 5.4 DOHC that I had to pay a hefty core charge on and I would sell it, I was going to pull the heads and replace the valves, chains and guides. It only broke the intake chain on side 1. I think it only has 2 bent valves at...

I listed my project on Craigs List today. It has to go as I have too many projects unfinished that have a higher prioity;norfolk craigslist > for sale / wanted > cars & trucks - by owner 1998 Ford Expedition 4X4 Project - $2000 (VB 23452)...

I have a 428 CJ block and set of 8 Federal Mogul forged pistons that I'm selling. The block is a C6ME with the letter "A" in the rear of the block. The block has been Magnaflux and Sonic tested and is .060 over 428 standard size and come with a set of Forged pistons with rings that was run in...

That just makes me want to puke.

It's been a long time since starting this thread but here's the end result. The engine that was im the Navigator did have a broken intake cam chain and as I knew that it is an interference engine I started searching for another engine. I bought a used engine from LKQ and got it in. It was a lot...

Did you ever do your ball joints?

I have a 428 CJ block and set of 8 Federal Mogul forged pistons that I'm selling. The block is a C6ME with the letter "A" in the rear of the block. The block has been Magnaflux and Sonic tested and is .060 over 428 standard size and come with a set of Forged pistons with rings that was run in...

It might be the original engine of that truck.

I'd post a couple if I could figure out how to do so.

Thanks guys, for the attempts to help me diagnose the engine problem with my Navigator. It turned out that the driver side intake cam chain was broken. We did a compression test and found very low compression in cyl.s #5 and 7 so we stopped everything and removed the cam cover and found the...

I just hope you never get a job with the Post Office. At least in my area.:guns:

I wasn't that lucky/busy. I was building a couple of box stands to hold a couple of spare Mod Motors. I really butchered up some good wood.