The truck is mechanical finished for 2 weeks just waiting on the interior guy now. I'll try to upload a couple pictures.

Good luck with your Restoration it feels good to see progress. I've done a 69 Chevelle but went the retro mod route. I thought I'll spend around 28k to get everything I need. And I'll do everything myself. I ended up at 42k and that was getting a lot of parts on sale. I've priced out some parts...

I used the crown vic interior brake setup, MC, and booster. I used the bottom right hole on the f100 firewall booster.(because it lined up perfectly with the master cylinder) And made a template with the crown vic fire wall. Will need to move the pedal to the right a little with a homemade...

A couple pictures of the truck.

A little more progress. I'm nearly done with mounting to body I haven't had a chance to work on it till this morning.

I cut out the remaining areas that are keeping the bed from dropping down. Aligned the bed on jack stands and moved the lift. Built the center brace and welded it into place. Trying to get the bed mounted before this weekend. Then I can get the front clip bolted in and 2 mounts welded up for...

Thanks for the encouragement y'all. I watched the hotrod garage build. They did a good job on it. I need a lift and a shop like them that would help with the up and down over and over. I Installed the new mufflers today. I also cut a little of the rear frame to try and drop the rear below where...

The bed still needs to be lowered in the rear and I'm going to build some bed mounts to bolt the bed to the frame.

Yesterday I started lowering the bed into place. I set the cab at a height I liked the mouldings are 36 inches from the bottom to the ground. I had a couple problems with the bed. First I wanted to keep the bed braces but the bed will not go any lower the 38 inches with them in place. I removed...

I seen a side mirror idea I wanted to try. I will need to shorten the side mirror poles. I bought a new roll pan. The pan is plain steel and I needed it to match the truck. I looked for a way to rust metal quickly. First step was to clean the metal and sand the area I planed to paint. I ripped...

Set the cab on the crown vic the cab has some clearance issues the cab braces and these rear cab flaps. I cut the f100 cab mounts from the f100 frame. And welded them to the crown vic frame. I used the crown vic mount pads but had to drill the f100 holes out to 40mm with a step bit.

I Striped the complete wiring harness, and took part of the crown vic firewall.

I'm going to upload a few pictures of the progress.

I bought both vehicles in April and started taking the CV apart it was a running and driving car. I will get pictures up once I figure out how to post them.

Hello y'allRecently pick up a 64 f100 short bed and a 2011 crown vic. The plan is to use the f100 body and interior only. The rest will be Crown Victoria. I have built one other car completely from the ground up before and was a getting little bored. I guess I like to stay busy. The Truck is a...