So i'm doing some repairs on my truck, and my inline high pressure pump leaks. I was looking at rockauto but can't find out the right pump.... Anyone has an idea what pump i should order? (4.9 inline6 engine) thanks

hello,i somehow lost my haynes manual, and my laptop crashed so i lost my scan aswell.i will order a new/used paper version on amazon, but i want to start changing my engines gasket+ head gasket and it takes at least a week to get the book to europe. anyplace i can find a readable (online) or...

so i was looking to get my f150 4.9 a more original look, i had a donor car sitting in the yard, and thought to use its air cleaner box to replace the round open air mixer (lpg). now it seems the lid has gotten broken (and bad repairs) along its way. Is there anywhere i can find these lids? post...

So probably one of the many asking this question but i couldn't find it directly trough search option. I will need to fit new tires this summer/fall, i now run 32/11/*15 yokohoma geolander but for starters they suck in rain, and just don't have the look. Truck is leveled with heavy duty f250...

im looking on a http://www.summitracing.com/dom/parts/sja-182p2k/overview/year/1989/make/ford/model/f-150 2inch lift kit, and want to know if i need more parts then there are in the kit suggested? why i want a lift kit: i want the truck to sit higher then original and the springs are all worn...

here is the situation: started the truck and turned on the lights, noticed i had no dash lights, looked in the mirror and no taillights where there aswell, wiggled the headlight switch knob, this gave me taillights, changed headlight switch with new one: when i turn on the lights with dimmer...

any idea on where i can get an engine wiring harness of an 88 f150 with pcm mounted on distributor? any junker that can ship to belgium? or new would be better.thanks

hello, since ive been changing starters alot lately i found the thread of the starter to belhousing beeing bad, redid it with a V-coil but it keeps coming loose and messing up my starter, since i have an old transmission with a good belhousing but i don't have the right bolts for the starter i...

i want to convert my 300 cid from the module ignition to an old school points ignition with vacuum advance question here is what do i need and how to connect, my thought is:ignition coil (1970's 300cid) distributor (1970's 300cid) run a vacuum line from my lpg carburator to the vac of the...

as title says my 4.9 EFI won't start it cranks but that's it, checked following:fuel and eec relays, fuel relay gets no power at coil nor click when turning over the engine with a socketecm: doesn't smell burned nor has any marks in it.get's no spark at spark plug, not from the coil...

so when discarding the air pump + EGR system i fell into some broke vacuum lines: at the drive side of the engine on the end there are 3 switches/sensors/solinoids with 2 vacuum lines running to them. what are these parts and are they from EGR or not and get they be thrown out?, the last one has...

so i decided to stay on the efi system for my truck, but have some questions id like to clear up:1. an upgrade for it should be an injector swap out of an 302, how efficient will this be2. i'm burning 98 octane fuel, should i retard timing to 12 (or more)3. coupled on question 2, i also...

i'd like to tidy up my truck starting from the engine bay and need advice/helpfirst i want to get rid of all things not in use before:what is this part :should arrowed part be bend like this:can i remove these and just plug it? air pump not in use:

so this is the fourth starter i installed and again it's starting to go... it all started after putting in a new one because of lame starting all the new where acdelco, after the first starter i put a new drivewheel in aswell still no luck, starters are 1.8kW (too high?) or should i try another...

hii'm planning on doing a C6 to C6 swap so just another gearbox since the C6 in it now won't engage D when cold (needs little warmup) i have some questions before i startdoes the tranny and torque converter needs to be flushed (emptied)? what equipment should i need and what should i look...

since ive put on my grille guard (pics will follow) i noticed the passenger side of the front clip has move +-1inch backwards, (front bumper isn't straight due to a previous accident (don't know how hard it's from the prev owner) chassis had been checked and should be straight so my question is...

as my title says i would like to know if body parts of a f250/350 will fit on a f150 aswell as tonneau covers? or will this just be needed to be measured out?

hello everybodymy name is johny and i just bought a Ford F150, 1988, 4.9 siw inline. as the truck is it needs work and i would need help. i'm hoping to get some help from you guys and i will try helping you.smilieFordlogo