we can still shoot thieves in Texas!

I used to have a Gal name Ruth. She loved to ride on the back of my motorcycle. Till one day I took a low water crossing to fast and she fell off. What could I do but go on Ruth-lessly

Is her name Edith, Cause then you could have your cake and Edith too.smiliestirthepot

BTW how did the Leading go?

Option 2. and as the cable guy said "Getter Done"

Can't say but the ones in the Carpenter catolog look as close to original as any I have ever seen. We used to jackem up a little and get them close to right the scab in some plate and angle right over the old ones. But me and my brothers had no money or sense. nearly burned one old truck to...

Did you buy the mounts on page 89 of the Denis Carpenter catolog? If so from the picture follow my #2 suggestion.

Still a half day to do most Rig Welders around here have a half day minimum.

Having re thoughtI was raised up north. Farther north than I care to admit. Anyway these old trucks the gen 6s and 7s were brand new then. The way these cab mounts are built they tend to hold the road salt and mud there for rust out over time. I had a 70 model when I was in high school that...

the sherrifs daughter said..........

Im gonna bet tire also. Had a similar thing happen on my used to be my 93 4x4 shake like hell when you brake but be pretty much normal ever else. I could not find a problem in the front end so I took it to the Ford house in Odessa. They drove it and came back with warped rotors. I swapped em...

I have been asked not to return to Missisippi

Your gonna want to jig it up so everything is square and in its proper place and at the correct elevation in relation to each other. Dont want it to be crabbed or listing. Yes 4 hours give or take. not counting removal of the cab of course.The jig need not be an elaborate thing. If it were...

roughly 35 hrs

read hide away