I have a 97 Econoline that needs plugs. While I have the coils off is there a
way to test them with a multimeter? Also best gap for the new plugs.
Thanks
My 97 ford econoline has started to skip, I think that the plug gap has widened or the coils should be tested. My question is, do,and is that the fuel rails have to be lifted up ,is that a hard job? Also how do you tell a 3 valve
engine from a 2valve engine. Does Triton mean 3valve . Does...
Found the panelI opened the panel, can move piston manually and air comes out but
will not work by the switch . Will keep looking.Thank you for the info. Gremlin
97 E150, The air conditioner is working but the air is not blowing out of the dash vents. I set it on max AC and turn the knob to the coldest setting, I
can hear the blower but there is no air coming out of the vents.Is there a fuse that controls this?Also the switch that controls the blower...
Thanks Smokey,the heads are cast iron, I know if they are aluminum at least on an escort 1.9 the head bolts stretch, I know as I have an 87 Escort
in a trike.
Recently acquired a Bronco as junk,was told that it had a motor rebuild but has been sitting for several years.I would to use this engine in a project so I pulled the intake and heads,everything looks real good. this engine has a two barrel carb and solid lifters. Is that the way all of the V6...
I would like to put a larger engine in my 86 ranger which now has a v6. What other v8 ford will bolt up to the 5 speed trans. Thanks for any suggestions.Thank You Jim