power steeering
some people have had power steering pump mounting issues were the stock pump will hit the steering gear box, and some haven't. i had these issues. there are several ways around this. 1) you can get a sagnaw style power steering pump and brackets of a 460 van. 2) get the serpentine belt setup of a late model 460. 3) l and l makes a power steering bracket.
i went with a l and l bracket, reused the lower bracket that was mounted to the TRW pump. and get a pressure line off a 84 f250 with a 460. with a little tweaking the pressure line fits.
second on the l and l mounts. never used TEB stuff be i have been looking at the mid mount alt setup.
other little detail. the 460 fan spacer using a 3/4 inch bore not the 5/8 of the stock 400 fan. i had a friend with a latte open up the stock fan spacer to it the 3/4 water pump.
some people have had power steering pump mounting issues were the stock pump will hit the steering gear box, and some haven't. i had these issues. there are several ways around this. 1) you can get a sagnaw style power steering pump and brackets of a 460 van. 2) get the serpentine belt setup of a late model 460. 3) l and l makes a power steering bracket.
i went with a l and l bracket, reused the lower bracket that was mounted to the TRW pump. and get a pressure line off a 84 f250 with a 460. with a little tweaking the pressure line fits.
second on the l and l mounts. never used TEB stuff be i have been looking at the mid mount alt setup.
other little detail. the 460 fan spacer using a 3/4 inch bore not the 5/8 of the stock 400 fan. i had a friend with a latte open up the stock fan spacer to it the 3/4 water pump.
Attachments
Last edited: