racsan
4xford
took my rolled 97 ranger and made a useable trailer out of it, bed is from my 94, still want to put a tool box on the front.
the beginning, the 97 i bought for 500 that had a bad trans (no 1st):
https://www.flickr.com/photos/154582078@N03/37162757555/in/dateposted-public/
97 when it was a flatbed, before i rolled it in a field:
https://www.flickr.com/photos/154582078@N03/37947557526/in/dateposted-public/
after i rolled it, took off flatbed and cut crushed roof off, actually drove it this way a few days, was kind of fun:
https://www.flickr.com/photos/154582078@N03/37020992712/in/dateposted-public/
time to cut the frame, made the cut right behind the trans crossmember:
https://www.flickr.com/photos/154582078@N03/36378342533/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/36794688540/in/dateposted-public/
bent frame rails in to each other and welded in a 3x3 beam for a tounge:
https://www.flickr.com/photos/154582078@N03/37192297985/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/37192306865/in/dateposted-public/
added a jack, primed and painted frame, added coil helpers to axle:
https://www.flickr.com/photos/154582078@N03/36378417833/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/37192421435/in/dateposted-public/
bed back on, fits nice behind my 42 allis C :
https://www.flickr.com/photos/154582078@N03/37037750156/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/37037737426/in/dateposted-public/
made trailer a 2-tone, might do it like the allis someday:
https://www.flickr.com/photos/154582078@N03/37271699046/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/36609583174/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/37288396882/in/dateposted-public/
the beginning, the 97 i bought for 500 that had a bad trans (no 1st):
https://www.flickr.com/photos/154582078@N03/37162757555/in/dateposted-public/
97 when it was a flatbed, before i rolled it in a field:
https://www.flickr.com/photos/154582078@N03/37947557526/in/dateposted-public/
after i rolled it, took off flatbed and cut crushed roof off, actually drove it this way a few days, was kind of fun:
https://www.flickr.com/photos/154582078@N03/37020992712/in/dateposted-public/
time to cut the frame, made the cut right behind the trans crossmember:
https://www.flickr.com/photos/154582078@N03/36378342533/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/36794688540/in/dateposted-public/
bent frame rails in to each other and welded in a 3x3 beam for a tounge:
https://www.flickr.com/photos/154582078@N03/37192297985/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/37192306865/in/dateposted-public/
added a jack, primed and painted frame, added coil helpers to axle:
https://www.flickr.com/photos/154582078@N03/36378417833/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/37192421435/in/dateposted-public/
bed back on, fits nice behind my 42 allis C :
https://www.flickr.com/photos/154582078@N03/37037750156/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/37037737426/in/dateposted-public/
made trailer a 2-tone, might do it like the allis someday:
https://www.flickr.com/photos/154582078@N03/37271699046/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/36609583174/in/dateposted-public/
https://www.flickr.com/photos/154582078@N03/37288396882/in/dateposted-public/