Sparky83
Virginia Chapter member
Seems to bounce onthe way up too.. Right about the 35-38 needle on the mechanical one bounces..
Again, the only measurement that makes any difference is at WOT.Alright... I bought a mechanical gauge from summit I'm getting the same odd readings... Sometimes it'll read 55psi. Oter times 35 at idle or when I've got koEoff
Supposed to be under a load. The special tool mentioned earlier simulates the loaded wot condition. Diesel Fuel Flow Tester 310-193could i get the same reading without going down the road? had mom rev the engine hard to simulate going WOT while i stood up front to watch it and itd drop to 40 when it would read 55 to start with..
apparently my seats been taking a beating
I bought my adapter from glowshift. Reasonably priced