Thread: Help Please
View Single Post
  #28  
Old 04-14-2018, 07:52 AM
popsthebuilder popsthebuilder is offline
 
Join Date: Dec 2017
Posts: 23
popsthebuilder is on a distinguished road
Quote:
Originally Posted by fatherdoug View Post
The tube on the left valve cover is a vent for the valve cover. It normally goes to a connection on the side of the air cleaner housing. The EGR would be located between the carburetor and the intake manifold. It is normally a plate about 1/2 inch thick.

Look at page 29-01-4 in the Gen 6 maintenance manual section under emissions. It shows a drawing of the EGR valve on a 460 engine. It is the round metal diaphragm toward the back of the engine underneath the carb mounting plate. There should be a vacuum line that runs to the EGR valve.
He did mention a delete plate or egr plate. I'll look at what you referenced. The vent on the valve cover not being hooked up to the air cleaner couldn't contribute to the detonation could it?

I don't mean to be so ignorant. Thanks for all the help.


Sent from my Moto G (5) Plus using Tapatalk
Reply With Quote