Ford Truck Fanatics

Ford Truck Fanatics (
-   Generation 6 (
-   -   What did you do to your Dent today v2 (

DNFXDLI 04-08-2017 09:33 PM

What did you do to your Dent today v2

68F1006.4 04-08-2017 09:43 PM

The first thread must've closed as I was typing my reply, one minute I was in, the next minute was "nope, not here!", lol!

This might help, I know there's no Ford love, but EFI is EFI.

Ole Green 04-08-2017 10:00 PM

Very cool video! Yes, I want the HP's I can get along with the adjustments just magically happening as I change altitude. Plus the heat I get off of the 460 likes to boil that stinking alcohol gas, so a real pressure system to fix my issues. I mean my trucks issues, there is no fixing me.

fatherdoug 04-09-2017 05:53 AM

Ole Green, in answer to your question about parts needed, I think it would be appropriate to post a new thread in the "Classified" section. Maybe a moderator can confirm this?

If you are worried about exposure, the thread will show up as a "New Post", which people will see and read. Hope that helps.

Ole Green 04-09-2017 09:41 AM

New blower motor in an A/C truck today. What a pain! Still working my way back out, will be changing out the vac lines, dash lights, repair or replace vent ducts, heater core (done), dash prep'd for paint, anything else I should consider? Dont really want to pull the dash out again anytime soon.

fatherdoug 04-09-2017 12:18 PM

Might also want to consider changing the heater core while you're in there. Like you said, you only want to do that once! Brass heater cores are hard to find, but they are still available. Most of them are aluminum anymore. :headbang:

Ole Green 04-09-2017 12:54 PM

Yep, change the heater core and as you said I could only find aluminum. Anything else?

Ole Green 04-09-2017 12:58 PM

By the way love your truck Doug. Looks to be very similar to mine other than standard cab. racetrack molding tail gate trim, power slider etc. the same. Also looks like you have a bit of a lift. I went with skyjacker 4 inch, what is yours? Originally I just used F350 springs on the front end to squeeze 35s in, but did not have enough room to turn from stop to stop's with chains on, which is a no-no in Oregon.

fatherdoug 04-09-2017 03:57 PM

Thank you. No lift. It is all stock. I originally had 33x9.50x15's with no problems, but those tires are hard to find. Now I have 31x10.50x15.

DNFXDLI 04-09-2017 05:10 PM

I moved the frame out in anticipation of doing some more filling and grinding.

All times are GMT -5. The time now is 04:26 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Ford Truck Fanatics is not affiliated with or endorsed by Ford Motor Company.