Im hoping one of the members here more versed in the older trucks will chime in and help. All i was able to find were the codes. I know low trans fluid levels can cause wonky shifting. But figured you would have already checked that since you had just done the solenoid pack. And if your...
Code 67 -
Service Code 67 indicates that during Self-Test, voltage was high on NDS (Pin 30) or ACCS (Pin 10) circuit.Code 21 - indicates the transmission wasnt run up to temp before self tests were run.Code 41 - its a lean emissions code. Right bank supposedly. Which can cause misfires if...
Thats a bummer man. The snapon guy in my areas kinda a D... I know a few techs in the area hes screwed over on warranty stuff simply because he didnt want to deal with it. Some of the shops asked him not to come back.
Double check your fuses. When i got my truck i found that the po replaced many with the wrong sizes. Had to go through with the om and replace almost half with the correct sizes.
Sorry for late reply been busy lately with life. But as far as flushing. Ive known some people that swear by flushing the coolant passages with things like "Rad flush" you can find in most stores on the shelf or fords thing (forget what its called atm). And others that dont. Personally i just...
I dont know about the 88. But i know on my 04 stang it goes from relay to what they call a fuel pump control module. Then to the inertia switch and then to the pump. The control module regulates the voltage to the pump to vary the speed and pressure. But your case definitely sounds like...
P0475 - back pressure control module malfunctionP0500 - Failed vehicle speed sensor. Open or short in the wiring harness.P1832 - another transmission code concerning the pressure control moduleP1876 - transmission control moduleB1203 - fuel sender shorted to batteryB1318 - battery low...