Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

1950 F1 Project

So I'll go ahead and start a new post to share my build progress, instead of using the "My First Post" thread. I won't repost the same pictures, but I'll show you the list I'm working off of and will of course add pictures as I progress. If you've got any suggestions or tips please feel free to share!

IMAG0769_zps7be7983b.jpg


smilieFordlogo
 
So not as much progress this weekend as I'd hoped, but I got a little done. Since the bed was welded to the cross-members, I decided to try and cut the bed out and remove as one piece. Not happening by myself, so I will be removing the bed in pieces. Here you can see where I cut through the bed to start freeing the bottom panel from the cross-members (I have to cut three of these), and then at my stopping point this weekend is one side panel removed.

IMAG0782_zps962f8508.jpg

IMAG0786_zps18e27530.jpg

IMAG0783_zps78cb349b.jpg

IMAG0785_zps8a0e63ba.jpg
 

Ford Truck Articles

Top