mach3514v
FIRST-ON-RACE-DAY
I picked up a 1977 F150 4x4 M/T 351M short bed. I'm in California and need to smog it. It appears relatively stock and has a Non Catalyst valve cover sticker....heavy half ton? It does not have a cat but the ford master parts manual shows a 77 f150 4x4 with a cat...im confused.
There is no thermactor pump on the 351m..i need to confirm this is correct also.
My carb is missing the throttle kicker...is that vacuum operated and needed for passing ca emissions?
Finally I'm trying to route all the vacuum hoses and valves correctly.
Is 7-71J-R10 the correct calibration diagram? If so can someone send me it or the correct one large please.
Thanks for anyone's help.
There is no thermactor pump on the 351m..i need to confirm this is correct also.
My carb is missing the throttle kicker...is that vacuum operated and needed for passing ca emissions?
Finally I'm trying to route all the vacuum hoses and valves correctly.
Is 7-71J-R10 the correct calibration diagram? If so can someone send me it or the correct one large please.
Thanks for anyone's help.