Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

What did you work on today

heavydoc

Instigator
Staff member
1,994
70
WNC
Let's see what everyone is working on.

Went out to a Takeuchi excavator with hydraulic leaks an saw this before I even stepped outta my truck
59b51d6245cb7cba6992d414de52b6c8.jpg
0237a5447708c04e303184d0edb1c61f.jpg
 

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
i unloaded 6 pallets... 4 of them in housewares and 2 of them in candy....
 

heavydoc

Instigator
Staff member
1,994
70
WNC
I bet we couldn't, hardly touch the stuff after eatin a whole pan of fudge when I was around 10 or 12
 

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
I bet Doc and I could eat a pallet of candy.

Sent from my E6810 using Tapatalk


i keep trying to sell a case when people walk by when im loading the shelfs... yet to get any takers... lol
 

Blue-Truck-Nut97

crank polisher
551
18
Still making sporadic progress on the Allis Chalmers. Drained the muck out of the gear boxes and refilled, greased everything, found a couple failed fittings covered in silver roofing tar. Drained 6 gallons of water out of one of the drive chain cases, repaired wiring, found the hub nuts were finger tight, removed 2 broken lights, installed 6 more, removed 12 feet of wire from inside the cab while installing new lights.

But on the bright side, the jack we saved from the scrap bin works great! Funny what a little oil will do.
694bc116dfb9edae8bba0a1121a5265b.jpg
eb996a39830c113e38c8fc88a794a400.jpg
85bb4d637068761249f12f98e982ec86.jpg


Sent from my E6810 using Tapatalk
 

heavydoc

Instigator
Staff member
1,994
70
WNC
Finally fixed this winch. Another shop “rebuilt” it an left out pieces. With no manuals I had to reverse engineer it. This was going in to replace the brake dump spool an install the missing spring
78d72b6a99af9b340b19774462507403.jpg
98d02e38b808161bb846adbfc5217af1.jpg
65c1d551ff6b669fce26a88a7bd0031e.jpg
d01255bf0690644f2c5c825a493945b6.jpg
6d87336637ae38197e02be2eb064b812.jpg



Sent from my iPhone using Tapatalk
 
9619c179b152b93c0e30c57715b097c4.jpg


2 Mack’s , 2 6.ohs
White Mack had a bunch of brake work on it ( again)
The blue one needs service , air leaks fixed . Door doesn’t open on the drivers side . I noticed a wheel seal leaking .
The white 6oh is getting a delete and oil cooler . The blue 6oh has something wrong with it that has yet to be determined...


Sent from my iPhone using Tapatalk
 

heavydoc

Instigator
Staff member
1,994
70
WNC
Put the right bucket cylinder on a 844 K2 today, pulled and rebuilt it yesterday.
6e8707eab72ed8fe509631ae2d7b7ee2.jpg
 

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
I cleaned the trucks windows inside and out... the outerside looked like a bug massacre happened on them.... they seem to like flying towards the lights at night.....
 

Blue-Truck-Nut97

crank polisher
551
18
Finally done with this thing. Lights up like a shrimp boat now.

On to the aluminum flatbed that got a pair of loader forks stuck through the floor.
8847e5a2694737bb88af5561ddca49bc.jpg


Sent from my E6810 using Tapatalk
 

smokey

Hitech hillbilly
Staff member
I was out on a hunt for a new ride today. I got rear ended Oct 31 and they totaled the car. Found nice looking lariat till I saw the swiss cheese frame. Well the hunt will continue.
 

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
i like the blue one there....
 

Ford Truck Articles

Top