Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

Quick Fuel carbs by Left Eye Blind Racing

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house
We are proud to announce our partnership with Quick Fuel carbs and the custom built Slayers now available on our website (these are not stock settings like most vendors you'll find). Need something bigger or want to go EFI, give us a call.

https://left-eye-blind-racing-and-f...ayer-600-cfm-custom-built?variant=42000741267

IMG_2844.JPG


And for those that prefer black...

https://left-eye-blind-racing-and-f...lack-diamond-custom-built?variant=42002154003

IMG_2845.JPG



Custom built to your ride, from engine specs, to vehicle specs, transmission type to elevation - every carb and every setup is different - these carbs are built to your specifications so they're ready to bolt on and perform flawlessly with minimal, if any, tuning.


Slayer Series street carburetors are designed with many of the same innovations and features that are built into all QFT™ race-winning carburetors, including changeable air bleeds and power valve channel restrictions. It's designed with a secondary metering plate with changeable jets, and features all aluminum components for additional weight savings. All Slayer Series carburetors are equipped with universal throttle levers to accommodate Ford A/T kickdown, GM 700 R4 mounting holes, and ability to mount brackets for Chrysler vehicles. Slayer Series are available in 450, 600, and 750 cfm vacuum secondary models.

• Vacuum Secondaries
• Electric Choke
• Single Metering Block
• Secondary Metering Plate
• Cast Aluminum Throttle Body
• Single Sight Glass Windows
• Changeable Air Bleeds
• Adjustable Needles & Seats
• Notched Secondary Floats w/Jet Extensions
• Available In 3 CFM Sizes

You will receive an email from us after you place your order with a detailed spec sheet to get your carb built specifically for your vehicle - the more info you can provide the closer to bolt on and go we can get you. Because these are all custom built please allow up to one week for your new carb to ship. All carbs ship with a build sheet with all specs included.
 
Last edited:

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house
IMG_2846.JPG


IMG_2849.JPG


IMG_28471.JPG
 

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house
Here's mine...

IMG_5052.JPG


And here's Paul's

IMG_2850.JPG
 

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house
Technically yes...but they're circle track set ups. Nothing that would be a stock style 2bbl replacement though.
 

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house

DNFXDLI

The Token Canadian
Staff member
Thanks Ben. I see that system is good for 525hp...which might be at the cusp or slightly below what my 434 will produce. Is there anything above that?
 

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house
Thanks Ben. I see that system is good for 525hp...which might be at the cusp or slightly below what my 434 will produce. Is there anything above that?

In kit form, no...it would require some tweaks.
 

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house

Ford Truck Articles

Top